Hilux F Series IFS Crownwheel & Pinion into torago carrier

[gearb0x]

Hey guys,

Calling all diff experts, I was wondering if one of these would fit in a torago/corona F series diff

http://cgi.ebay.com/ebaymotors/TOYOT...Q5fAccessories

It is for a hilux front diff which should be an F series, i was just wondering if the front diffs turned the wrong way around or anything silly like that (i have seen "reverse rotation" r&p's advertised on ebay before

Regards,
Phill

[cambelt]

The gearset will bolt up but the offset of the 5.71 gears I don't think will work in a tarago F series, ask them if they will fit a KZN 165 hilux and if they do then they will fit a tarago diff.
Dave

[gearb0x]

I have found this page which lists an application list, not sure if its right though

http://www.xloffroad.com/motive-gear...nd-pinion.html

some pics of one being installed into a hilux IFS here
http://www.gearinstalls.com/ifs571.htm

Motive application list for the dif is as follows:
TOYOTA 4X4 LIGHTTRUCK FRONT 86-96
TOYOTA T100 97&UP

Yukon make a similar ring & pinion which suits this application
http://www.yukongear.com/DiffDetails...e%3dToyota+7.5
4Runner: 1986 - 1995 (Front)
Hi Lux Pickup: 1986 - 1995 (Front)
T100: 1993 - 1998 (Front)

does that help?

Phill

[gearb0x]

also mx13 F series is a possibility if im lucky enough (not holding my breath)

[cambelt]

Ok Phill it looks like the aftermarket gear sets they use a thicker crownwheel so it will work in the taller ratio housings , i think you will be fine to use them .
Do you need a complete MX13 diff ?
Dave

[gearb0x]

Ahh thats good news,

if you know of one yes, check your pm