a bit of turbo help

[timcorona]

well pluse racing did it

[timcorona]

i want sas to do the tune when i get the cash

[timcorona]

No worries, if you didnt have a programmable ems, you could gain spool time by messing with the timing to bring the the turbo on a little sooner, since you do, its a moot point for you assuming it is tuned correctly.

i told the y guy at pulse to get the lag out but
a few of my mates think i should change the turbo set up because of the rear housing its got a big housing hay and im thinkin of a smaller cooler too to help the amount of air that it needs to push through it is a laggy car

[SillyCarS]

i spoke with the dude i was thinking about tuning my 1g with 3076r with 0.63 exhaust housing and similar fuel system yesterday and he thought 220rwkw was a bit stupid and the turbo was too big and 18psi was too much

from what ive seen on here i'll get a 2nd oppinnin i think..

but if you can wait a month or two and the money wont burn a hole in your pocket mine will be tuned and you will be able to compare 2 very similar engines. Ie mine and kedderz. you may even get a drag result out of it

my bet is the potato is more suited for what you want

[Kedderz]

silly You will EASY get 250rwkw out of yours probably at 18psi.
I however really wouldnt run that much power through a stock (unopenned/rebuilt) motor kyle rekons this is where they let go.

That said my new motor im hoping to reach a lazy 300rwkw......pity my engine is back in SA and the forgies are here currently....

[SillyCarS]

good to hear. tell me, what should i go for with a safe tune 220? i'm gunna need a clutch next i reckon too

[Kedderz]

I wouldnt be surprise if you reach 220 at 1 bar with your 3076r. Craig (ddeane) hits 230rwkw on his disco potato with a (i think) 3076 compressor wheel and .64 housing at 13 psi.

[SillyCarS]

that sounds more like it, i think the tuner is a pussy. ill ask 1j who did his cos no doubt he'll know his shit. give us a shout when ur over this way

[Kedderz]

He probably just doesnt want to do it to be honest, old 80s turbo tech, stock internals and new big (for 2.0L) turbo, probably thinks its going to blow and since it isnt a easy sr20/nissan tune he cbf

[hypo23]

im running a brand new twin entry 3076r on mine and get around 350hp on about 20psi .86 rear housing

[Kedderz]

Thanks hypo, what management is yours running?

[hypo23]

just an old microtech mtx8

[timcorona]

what sort of power are 1g's relieable to

[timcorona]

kedderz u said ur turbo will be for sale whats happening there

[Kedderz]

Will be forsale yes but not yet.