Hey guys im about to lose my mind at my ke26 rolla, mounted a 13bt/Supra box into it and have been mulling over how im going to mount the rad/oil cooler/intercooler, iv basically sorted out the intercooler/rad so it will fit sweet, with the intercooler just barely fitting behind the standard apron (with abit of cutting) with the cooler pipes coming up on both sides through the engine bay etc.
my only problem atm is the oil cooler, bout to pull my hair out about it, tried mounting it directly under the intercooler but it hangs to low and looks abit dicky, i can't mount it under the radiator as its a biggun and is the whole length of the rad support vertically and the corolla rad support is so friggen chunky and huge it makes it a pain in the ass. i can't mount it in the engine bay inbetween the engine/rad as the castor rod mounts/radiator fan are in the way.
the only way iv seen that i might be able to mount it is on top of the intercooler and modify the oil cooler fittings (which are on the rear of the cooler and foul on the radiator) and put them on the side of the oil cooler, running the lines through the rad support.
any help would be great as ive sorted out alot of things with the car but this problem keeps slowing me down and is driving me nuts atm!