Results 1 to 6 of 6

Thread: T50 Oil Viscosity & Amount Required For Change

  1. #1
    Forum Member
    Join Date
    Apr 2010
    Location
    NSW
    Posts
    4

    Default T50 Oil Viscosity & Amount Required For Change

    Hi Guys,
    About to do my first oil change on a newly acquired T50 gearbox. I was just wondering how much oil should i be filling it with on change and any recommendations as to brand and viscosity?

    cheers,
    Tom

  2. #2
    Junior Member Grease Monkey
    Join Date
    Jan 2006
    Location
    NSW
    Posts
    191

    Default Re: T50 Oil Viscosity & Amount Required For Change

    Quote Originally Posted by thomen View Post
    Hi Guys,
    About to do my first oil change on a newly acquired T50 gearbox. I was just wondering how much oil should i be filling it with on change and any recommendations as to brand and viscosity?

    cheers,
    Tom
    about 1.5L, API service GL-4 SAE viscosity 90

    i normally use castrol 75/85 but thats cause i get it from work and its free

  3. #3
    Traditionalist Domestic Engineer parrot's Avatar
    Join Date
    Nov 2005
    Location
    Vic
    Posts
    551

    Default Re: T50 Oil Viscosity & Amount Required For Change

    According to the factory chassis manuals

    Early T type T50 1.54 litres

    Later A type T50 1.7 litres
    Cam mountain I feel different from the ordinary

  4. #4
    Forum Member
    Join Date
    Apr 2010
    Location
    NSW
    Posts
    4

    Default Re: T50 Oil Viscosity & Amount Required For Change

    Thanks so much!
    im not too sure which t50 model it is.. I got it from dellow automotive to put behind a nissan a series engine!
    Cheers,
    Tom

  5. #5
    Junior Member Grease Monkey TRD-12A's Avatar
    Join Date
    Nov 2009
    Location
    NSW
    Posts
    165

    Default Re: T50 Oil Viscosity & Amount Required For Change

    i use a 75/90 pennzoil in my T50 and i think it is about 1.5litres i just fill it till it trickles out then put the plug in, about 23 pumps of my pump at work (15 pumps=1Litre)

  6. #6
    Jack of all trades Automotive Encyclopaedia mattysshop's Avatar
    Join Date
    Jan 2007
    Location
    queensland
    Posts
    802

    Default Re: T50 Oil Viscosity & Amount Required For Change

    i use AFT dex 3 in all my T-50's unless they have fresh synchro's...

    they don't like changing smoothly above 7-8k behind 4a's unless you run thin oil...

    if it's a bit notchey or crunchy swap to dex 3.. and it will make a huge difference..

Similar Threads

  1. How To: T50 Electronic Speed Sensor
    By Bazooka in forum Tech and Conversions
    Replies: 36
    Last Post: 12-11-2011, 06:51 PM
  2. T50 to AZ6..... At the CNC....
    By oldeskewltoy in forum Tech and Conversions
    Replies: 87
    Last Post: 23-09-2011, 10:04 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •