r154 to ra28 gear selector and slip yoke question

[celica1g]

hey there

i put a 1jzgte with r154 in to my ra28 and found that the jzx90 gear selector did not fit as it was set up to be further back. but i noticed supra jza70 selector (threw pictures ) bolted straight on top off the gear box.so i was wondering can any one confirm this. that it bolts straight on or do i have to make a custom selector.

o and i didnt get a slip yoke with my half cut are they the same as any other makes?

if any one has these parts im happy to buy or trade.

thanks pete


o

[Bananaman]

Take a look at this thread, plenty of pics that may help (if you haven't seen already)

http://www.toymods.net/forums/showthread.php?t=56441

[matt_spitfire]

How did you get on with this mate? im looking at putting a 1jzgte into my ra23 and have found a 1jzgte with an r154 but looks to have a remote shifter did the jza70 selector fit?

Cheers - Matt

[jeffro ra28]

you can buy the slip yoke from hardy spicer new

[midnight_purple_GA70]

the jza70 shifter does bolt straight to the top of the gearbox... however i think you need to swap the rear housing of the gearbox to get the non-extension housing box... or it might just be a case of unbolting the extension bits and just bolting the normal shifter into the top... someone would need to confirm this though

[celica1g]

yeah the jza70 shifter does not fit as i compared the two gear boxs together side by side . and you do need to change the rear housing and selector .yeah so if you were to put this in a ra23/28 you need the jza70 shifter/gearbox or make a new selector (like i did lol ; ) ) because the remote shifter stick would foul on the floor sub frame and plus it would not line up with the centre consol ; ).