Results 1 to 3 of 3

Thread: ae92 corolla clutch? problem - help

  1. #1
    Toyota Hoarding Grease Monkey squish_m8's Avatar
    Join Date
    Sep 2008
    Location
    South Australia
    Posts
    73

    Default ae92 corolla clutch? problem - help

    I don't know what on earth happened to the last thread i posted about this but anyway, i'll try again.

    I got this ae92 which is giving hassles. On occasions i cannot engage the next gear when driving but some of the time its fine. Double or triple clutching improves the shift though
    but it doesn't appear to be one of the clutch cylinders.
    Another symptom is a very distinct 'thud' or 'thunk' sound when i release the clutch after having it in gear. This happens all the time when i put the car in neutral.

    Any ideas?

    At one stage there was a 'clack clack clack...' sound coming from the bell housing/gearbox aswel, but all these problems tend to happen more often after a good thrashing.
    Anyone had this before or something similar?

    Spill some knowledge on me. cheers x5
    Last edited by squish_m8; 22-02-2010 at 10:49 PM.

  2. #2
    Backyard Fabricator Automotive Encyclopaedia
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    1,103

    Default Re: ae92 corolla clutch? problem - help

    possibly popped a spring out of the clutch plate which is getting jammed not letting the pressure plate engage. Although when I've had that happen to me with a few different plates the thing tends to get stuck in gear and you can't get it out when the cars running.

    You've checked the throw of the slave at full pedal actuation?

  3. #3
    Junior Member 1st year Apprentice Grippy's Avatar
    Join Date
    Dec 2005
    Location
    SA
    Posts
    39

    Default Re: ae92 corolla clutch? problem - help

    My AW11 had this exact same problem only a few week ago, would shift fine, then be difficult, then make that clack clack noise and be like its partially engaged even with foot all the way down. Turns out it was 2 broken rivets that hold the pressure plate ring thingy on and it wouldnt release properly.

Similar Threads

  1. help celica 1ggte pickle
    By celica1g in forum Tech and Conversions
    Replies: 11
    Last Post: 23-07-2009, 08:46 PM
  2. bout 1uzfe looms
    By gx71_chaser in forum Tech and Conversions
    Replies: 24
    Last Post: 19-09-2008, 11:23 AM
  3. Oil cooler setups for bout $150
    By AE82FROG in forum Tech and Conversions
    Replies: 10
    Last Post: 27-06-2006, 09:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •