Results 1 to 11 of 11

Thread: KE70 S13 suspension conversion

  1. #1
    Junior Member Domestic Engineer J0RD0's Avatar
    Join Date
    Jul 2006
    Location
    QLD
    Posts
    532

    Default KE70 S13 suspension conversion

    hi all, ive been searching around for some info for some suspension upgrades for my ke70 and cant find anything on using entire s13 front suspension + brakes as ive heard this can be done, correct me if im wrong. any links to threads which contain this information or build threads on how to do it would be greatly appreciated.
    RA23 1JZ VVTi 373hp - SOLD
    12.4 @ 110mph
    THE EVOROLLA 262.9hp - SOLD
    JZ parts facebook page - https://www.facebook.com/groups/524841910926804/

  2. #2
    Junior Member Too Much Toyota oldcorollas's Avatar
    Join Date
    Aug 2005
    Location
    sydney
    Posts
    12,496

    Default Re: KE70 S13 suspension conversion

    including cross-member? just make new mounting holes in cross-member and bolt in

    using just the struts? look for AE86 information
    "I'm a Teaspoon, not a mechanic"
    "There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)

    AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!

  3. #3
    umop apisdn Chief Engine Builder twentyEight's Avatar
    Join Date
    Jul 2006
    Location
    Queensland
    Posts
    3,108

    Default Re: KE70 S13 suspension conversion

    There's info all over Toymods and AE86DC about it, but here's what I used on my RA28 (I'm also running KE70 R&P Steering setup) which was all purchased out of an AE71. It does give bump steer in *A7# (and will in mine also) and you need to put a 14mm hole in the crossmember for the LCA bolt as the S13 is 14mm compared to the 12mm bolt the Toyotas run.

    Parts used:
    S13 HSD HR Height and Dampening (15 step) Adjustable 6kg/mm Coilovers with Adjustable Strut Tops
    S13 Lower Control Arms
    S13 Hubs/Steering Knuckles
    RA60 Rack Ends
    Bluebird TRX Tierod Ends
    Braided Brake Lines
    R32 GTS-T Calipers and RDA Slotted Rotors

    ([][][]II--LT--II[][][])


    Green '77 RA28 Celica - VVTi V8 Goodness...

  4. #4
    umop apisdn Chief Engine Builder twentyEight's Avatar
    Join Date
    Jul 2006
    Location
    Queensland
    Posts
    3,108

    Default Re: KE70 S13 suspension conversion

    Here's a good thread that also talks about the extra hole that you need to put in the LCA for the Castor Rod also.

    http://www.toymods.net/forums/showth...highlight=S13*
    ([][][]II--LT--II[][][])


    Green '77 RA28 Celica - VVTi V8 Goodness...

  5. #5
    Junior Member Domestic Engineer J0RD0's Avatar
    Join Date
    Jul 2006
    Location
    QLD
    Posts
    532

    Default Re: KE70 S13 suspension conversion

    thanks 28, that would have been why i couldnt find any links all the threads are ra23 & ae86. I forgot to mention is there any options for rear coilovers for ke70's?
    RA23 1JZ VVTi 373hp - SOLD
    12.4 @ 110mph
    THE EVOROLLA 262.9hp - SOLD
    JZ parts facebook page - https://www.facebook.com/groups/524841910926804/

  6. #6
    Gearwhore. Backyard Mechanic
    Join Date
    Oct 2008
    Location
    QLD
    Posts
    392

    Default Re: KE70 S13 suspension conversion

    All the feedback I've heard has been pretty negative as for how it handles. Why not the Pug/Hilux/Corona upgrade?
    The above opinion is just that - my opinion. It is not shared by any business that I am currently or have previously been involved with, nor any of their employee's.

  7. #7
    Junior Member Too Much Toyota oldcorollas's Avatar
    Join Date
    Aug 2005
    Location
    sydney
    Posts
    12,496

    Default Re: KE70 S13 suspension conversion

    KE70 shoul dbe almost identical to AE86 no?
    "I'm a Teaspoon, not a mechanic"
    "There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)

    AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!

  8. #8
    Junior Member Domestic Engineer J0RD0's Avatar
    Join Date
    Jul 2006
    Location
    QLD
    Posts
    532

    Default Re: KE70 S13 suspension conversion

    ive had the pug/lux/rona upgrade in my celica with coilovers and i wasnt really happy with the setup. The brakes were soo heavy and didnt really pull up that good. I have a s13 that has stock brakes and makes 390hp atw and it pulls up pretty fricken good, so the ke70 is alot lighter and should pull up fine.
    RA23 1JZ VVTi 373hp - SOLD
    12.4 @ 110mph
    THE EVOROLLA 262.9hp - SOLD
    JZ parts facebook page - https://www.facebook.com/groups/524841910926804/

  9. #9
    Junior Member Domestic Engineer J0RD0's Avatar
    Join Date
    Jul 2006
    Location
    QLD
    Posts
    532

    Default Re: KE70 S13 suspension conversion

    O/C - i have no idea
    RA23 1JZ VVTi 373hp - SOLD
    12.4 @ 110mph
    THE EVOROLLA 262.9hp - SOLD
    JZ parts facebook page - https://www.facebook.com/groups/524841910926804/

  10. #10
    Junior Member Too Much Toyota oldcorollas's Avatar
    Join Date
    Aug 2005
    Location
    sydney
    Posts
    12,496

    Default Re: KE70 S13 suspension conversion

    well. the cross-members and steering racks swap over, the brakes are bigger on the AE86 (different shocks too?), but for the most part the suspension pickup points are same... i thought anyway?
    Last edited by oldcorollas; 15-03-2010 at 01:47 PM.
    "I'm a Teaspoon, not a mechanic"
    "There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)

    AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!

  11. #11
    KE70 7AGE Grease Monkey jet81j's Avatar
    Join Date
    Sep 2006
    Location
    nsw
    Posts
    79

    Default Re: KE70 S13 suspension conversion

    good threads to look at is
    http://www.rollaclub.com/board/index...howtopic=12068
    http://forums.club4ag.com/zerothread?id=65385

    a difference between ae86 and ke70 is the strut towers are wider appart 15mm i've heard.

    i have coilover in the rear of my ke70, the shock mount on the diff was reinforced. seems to work fine to me and handles fine.

Similar Threads

  1. RA23/28 with KE70 steering column and rack and pinion
    By stradlater in forum Tech and Conversions
    Replies: 191
    Last Post: 24-01-2017, 04:39 PM
  2. Diff Conversion for KE70
    By Pnut in forum Tech and Conversions
    Replies: 12
    Last Post: 14-01-2007, 11:27 PM
  3. Clarification of Technical FAQ and Conversion Threads
    By river in forum Toymods Car Club Membership and Feedback
    Replies: 7
    Last Post: 05-06-2006, 10:20 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •