Hi,
Firstly, when the hazards are on I assume all relevant indicator bulbs flash? If so, then we caqn exclude blown bulbs. If a bulb is not lighting up, then replace it.
That fixes part of your problem, as it seems you have wired your loom incorrectly somewhere. I'd check through the loom from the switch to the bulbs. I think you may have, in the rear section, got your left and right indicators mixed up.
Parkers are the same... it seems like you have got them conencted to a permanently active voltage, bypassing the switch.
Check my rides thread "Turbo Trini" and go back a few pages to find a cct diagram that Hack put into my thread. Use this to check your wires and make sure you got the right coloured wires conencted according to the cct diagram.
seeyuzz
river
Bookmarks