4AGE 16v Bigport Question

[beauc]

Hey guys, new to the Toyota scene and have a ke30 i am doing a 4age conversion on, i picked up an ECU the other day along with some other bits, and haven't picked up a loom yet, i was just wondering if the computer will suit the motor i have and where i can get a loom to suit, preferably Sydney, cheers here's some pics.

[oldeskewltoy]

[mattysshop]

that ecu is not listed there.. but it looks like an AE82 bigport ecu..

and those injectors are from a AE82 bigport, the one WITH the air temp sensor, and NO Diagnosis box, they just had a big yellow 2 pin connector you jumper, to set/check base timing etc etc..

hope that helps you..

it's best to try and find a complete setup of ECU/dizzy/sensors/injectors/loom... as long as it is all from the same setup of smallport/bigport 4AGE you won't have any problems..

i had a early ae82 loom/ecu/setup (the one i'm reffering to in this post) in my AE86, running a 100kw smallport, with quad throttle bodies (using a 20v tps)

i'm not sure how the 2 different AE82 looms work together, the main difference i picked was the air temp sensor, the pinkish injectors, and the big yellow 2 pin plug, intstead of the little grey 'diagnosis' box... i've used without a problem a latemodel AE82 bigport ECU, in a factory 4AGE AE86 (and vice versa) but both had the diagnosis box...

[senn]

Would an AW11 ECU also work with this setup guys? Looks like a Bluetop...but i'm not 100% sure if there are major differences from ae82/aw11 ecu's...

[mattysshop]

AFIK the AW11 are AFM, not map sensored..

i've never seen a factory aussie delivered AE82 twinky with an AFM 4AGE.. that doesn't mean they don't exist.. but all the ones i have seen are map sensored..

[beauc]

Thanks guys, Craig at Just JDM told me they are mis matched so i bought a loom, ecu and injectors off him to sort the problem ..