3tgte

**kickstartRA28** · 08-01-2010, 10:53 AM

What aftermarket ECU's has anyone tried on the 3TGTE as Im in the market for one, just for fuel.

**lilcrash** · 12-03-2010, 11:04 AM

i used to run a haltech f10x, ive still got the maps here if you need them

**RBP690** · 12-03-2010, 11:28 AM

I run a Wolf 3D with my 3TG-TEU in a TA22. It's a version 3 so It's a little older now but I'm happy with it. I went with Wolf because YelloRolla had success with one of these on his 3TG and I also used Redline Rotary to tune it as he has good experience/results with Wolf computers and 3TGs. (He tunes YelloRolla's car....or used to anyway...I've been out of the scene for a while)

Hope the advice helps.

**big_zop** · 12-03-2010, 11:40 AM

How about you put a more descriptive title for your thread to make it easier for people to know what information you are after and it also helps the search engine.

Cheers, Paul

**white_sandshoe** · 12-03-2010, 12:30 PM

I'm running Microtech MT4 in mine... not the most accurate readings on the A/F so a bit of a pain to tune without a dyno.

**3jcelica** · 12-03-2010, 12:45 PM

If you are going to spend any money get one that does ignition even if it is second hand.

I run a megasquirt which is cheap but very capable, the standard ignition is nothing to write home about. The megasquirt has the potential for six ignition channels and seqential injection, launch control/flat shift, boost control and a whole lot of other stuff I don't use, but the price is very good and takes narrow or wide band o2 inputs (with autotune). Personnely I would buy one of these over a fuel only computer.

Roger

**white_sandshoe** · 12-03-2010, 01:48 PM

second that... I'll be upgrading to megasquirt v2 when i go TDO5-G18, intercooler, CAS and custom plenum. It's cheaper to get something that can handle (and tune for) future upgrades than to get something cheap and nasty that will do the job for now, but will be painful, or unable to use on a futher developed engine.

I'm only using the microtech because i had a spare laying around...

**turbotoy** · 12-03-2010, 05:51 PM

I got Haltech E6X.

**river** · 12-03-2010, 09:16 PM

Hi,

Originally Posted by big_zop

How about you put a more descriptive title for your thread to make it easier for people to know what information you are after and it also helps the search engine.

Agreed.

Also a simple search would show the following thread for 3T-GTE information....
http://www.toymods.org.au/forums/showthread.php?t=31201

Thread closed.

seeyuzz
river