sign up to www.jzx100.com dude, its a world wide forum on the jzx chassis, i reckon you stand a better chance there fo getting the info your after.
Hi, this is my first post on this forum, but I've been reading here for a while.
My friend and I are swapping a 1JZ-GTE VVTi into a MX83 Cressida. The seller said it was from a JZX100 Chaser. The wiring is looking to be a challenge, to say the least. The engine came with an auto trans, but we have sourced a USDM N/A Supra W58 trans. My problem is trying to find an accurate wiring diagram or at least an accurate ECU pinout. I have not been able to find either. So far this is some of what I've found:
http://mkii-supra.com/images/images/...g/jzz309gp.jpg
http://foto.rambler.ru/public/alex.s...3/1-webbig.jpg
http://www.monsterezza.com/2007/10/w...t-diagram.html
http://www.toymods.net/forums/attach...6&d=1136112318
http://homepage.mac.com/rib_feast/jzx100/JZX100ecu.pdf
None of these match what I've got, though. The connectors match, but the positions/colors/number of wires are not the same. I'm hoping somebody can help me out here. ECU part number is 89661-2A050.
For comparison here is the pinout of the 16 pin connector I have:
1 - Blue/Orange
2 - Red/Yellow
3 - Gray/Red
4 - White/Blue
5 - Green
6 - BLANK
7 - Brown
8 - Light Green
9 - Light Green/Red
10 - Blue/Black
11 - Yellow
12 - BLANK
13 - Green/Red
14 - Yellow/Green
15 - BLANK
16 - BLANK
Thanks in advance for any help. I don't know what to do next.
sign up to www.jzx100.com dude, its a world wide forum on the jzx chassis, i reckon you stand a better chance there fo getting the info your after.
Thanks for the tip. Here's my thread on jzx100.com if anybody's interested, I've added some pics too:
http://www.jzx100.com/forum/index.php?showtopic=6627
Bookmarks