which engine is in your ae80?...
basically what you need to do FROM SCRATCH if you dont know where or what lead is what or where they go...
1) take the dizzy cap off and start your engine, see which way the rotor button spins, thats which way you start putting your leads on...
2) put the engine on top dead centre, (cylinder 1 TDC on compression stroke, cylinder 4 on the rock)
3) where the rotor button points is number 1 on the dizzy cap
4) following the direction in which the rotor button spun when the engine was cranking, put your leads on corrisponding with the engine firing order, which is probly 1-3-4-2
that my friend, is how your put your leads on correctly if youve taken them off and didnt mark where they go =)
Bookmarks