S series flywheels

[SE86]

hey all

just wondering if anyone knows if 1s/2s flywheels have a 8bolt bolt pattern like the 3s, and if so does anyone have one lying around in perth??

any other info would be great

Cheers
Rick

[ViPeR_NiPPleX]

2s is definately 6 bolt, i'd assume 1s would be the same deal.

[SE86]

Ok there goes that idea hahaha

next question... anyone had a custom flywheel made up?? if so who did it for you and how much did it cost roughly??

Cheers
Rick

[CrUZida]

Custom 1 off's would be around the $600 mark.
Custom 'off the shelf' would be around the $400 mark.

PM 'CLG' he should have something.

[Dimitri]

got an Altezza clutch and flywheel here if you want. really good condition, but its dual mass, to aid NVH. still an easy way out of it.

[sam-131]

2s are six bolt
3sfe are six or eight bolt
3sge/gte are eight bolt

your best of going down to your local fitter and turner he'll should be able to hook you up if you give him the spec's

[ViPeR_NiPPleX]

1st gen 3sge is apparently 6 bolt

[sam-131]

i am 90% sure that all 3sg's are eight bolt

[rolleraction]

1st Gen is definitely 8 bolt.

[Cool1]

1st gen 3sge is apparently 6 bolt

I also agree with this.

[buck naked]

Got my 1986 ST162 3S-GE S53 flywheel on the floor in my garage. I checked, it's eight bolt.

[terryo]

all 3SG's are 8 bolt, but there are 2 different clutch sizes. 3SF and early 5SF are 6 bolt. I've checked a 2S I have, and its also 6 bolt. Custom flywheels are terrible to make. There are too many mass produced ones to make it worthwhile unless its a very special/expensive race car. I run a machine/engine shop, and even i hate when I have to do them for myself.