20V 4AGE Oxygen Sensor?

**Adash=P** · 21-10-2009, 05:30 PM

Can I run any 4 wire oxygen sensor on the 20 valve 4AGE or does it have to be the proper item with the correct part number?

Also with the ECU terminals, can I use the HT as the heat on sensor?

**IAN20V** · 21-10-2009, 06:23 PM

any universal one with ecu signal, ground and 2x heater outputs, i ordered mine through tim at autobarn dural picking it up during the week

**TERRA Operative** · 21-10-2009, 07:36 PM

Yep and Yep.

**inertia** · 21-10-2009, 07:43 PM

will cost abooot 80bucks

**Adash=P** · 21-10-2009, 09:13 PM

Thanks fellas. I got a price on AE111 4AFE sensor...$230.
Pretty sure a genuine one was about a $120.

The search is on.

**JRod** · 25-11-2009, 04:07 PM

Originally Posted by IAN20V

any universal one with ecu signal, ground and 2x heater outputs, i ordered mine through tim at autobarn dural picking it up during the week

hi this is my first real post on here.

would you happen to have a part number of the sensor you ordered?

cheers

jarryd.

**Hen** · 25-11-2009, 08:52 PM

Adash,

Just check the HT terminal. It is for the Oxy sensor heater, but I'd guess it pulls to ground to heat, so you'd need to connect one heater pin to +12 and the other to HT.

Yep, just checked here and the heater gets +12 and earths through HT.

Hen

**Adash=P** · 25-11-2009, 09:19 PM

Cool. Thanks for that.

Well the motor is in the SX now but I didn't get a chance to get full exhaust system made up so I'll be adding the OX sensor once that gets made.