1jzgte engine loom plug part numbers?

[jeffro ra28]

Hey,

Im about to wire up the autronic to the 1jz. I have the Toyota connector repair manual http://departments.weber.edu/automot...s%20Repair.pdf but just wanted to put some feelers out as to if anyone has already done the research and looked up all the toyota wiring loom plug part numbers for the 1jz?

I have a loom already but would prefer to use new plugs.

Thanks in advance

Regards
Jeffro

[jeffro ra28]

No one has done this and kept the part numbers list?

Now the link is dead

[wilbo666]

Plenty of other links for it around tho

http://www.scribd.com/doc/11192307/T...Harness-Repair


Most of the plugs have the part number on them...

Shouldn't take you long to write the ones you need down

Cheers
Wilbo

[jeffro ra28]

Wilbo,

Thanks for that link man, i spent ages looking for another one.

I never thought about looking at the actual plug for the P/N

Cheers

[wilbo666]

Wilbo,

I never thought about looking at the actual plug for the P/N

Cheers

Yep, just prefix the number that is on the plug with "90980-" and you have the Toyota Part number

Cheers
Wilbo

[jeffro ra28]

Hmmm, the main plugs i need dont have any numbers on them. Namely, coolant, knock, crank angle, cam etc. But thats kewl iv got them all marked, will take pics and cross reference with manual. Ill post numbers up once im done for anyone elses future reference.

[wilbo666]

Hmmm, the main plugs i need dont have any numbers on them. Namely, coolant, knock, crank angle, cam etc. But thats kewl iv got them all marked, will take pics and cross reference with manual. Ill post numbers up once im done for anyone elses future reference.

You sure?

I just went and looked at one of my spare looms and got the following...

Coolant: 10737 / 11062 (Different colours = diff part number)
Knock: 11166
CAS and cam (Same): 10947

Cheers
Wilbo

[jeffro ra28]

Whoops my bad, plugs were very dirty. Yep they have numbers

Only one missing is coil plugs and alternator.

[jeffro ra28]

Here is what i have come up from referencing from my loom. Altnernator and coil plugs did not have any numbers on them so cross referenced with manual linked above by Wilbo.


CAS & CAM: 90980-10947
Coolant: 90980-10737 and 90980-11062
Coils: 90980-11246
Intake temp: 90980-11025
Knock Sensor: 90980-11166

So wilbo, my knock sensors are different to yours?
EDIT: i just checked my knock sensors on both 1jz i have they both have plug P/N: 11166

[wilbo666]

Hmm yeah I got the knock sensor one wrong... gave the Oil pressure one (Loom is off the car and I didn't pay close enough attention.)

Coils: 11246
Alt (Flat): 11349
Alt (Round): 10341 / 90980–11491 I think.... Not 100% on this one as I can't check a physical plug.

Cheers
Wilbo

[jeffro ra28]

Thanks for spoon feeding me man! Its helped me alot

oh btw, you must have different knock sensors to me. mine are 11166. (edited posted above)

(EDIT: P.S. "you have to spread reputation before giving it to wilbo again")

[wilbo666]

oh btw, you must have different knock sensors to me. mine are 11166. (edited posted above)

Yeah I muffed that up, sorry! Corrected my post above

Cheers
Wilbo

[jeffro ra28]

Just thought id add this in here for simplicity for those looking for new terminals and rubber waterproofing sleaves for their plugs.

http://www.ih8mud.com/tech/pdf/WireH...l/repairwi.pdf

Oh and if you want the whole repair manual on PDF you can download it here rather then veiwing the ipaper thing from scribd.
http://online.pdfasal.com/automotive...1022e-pdf.html