Results 1 to 5 of 5

Thread: ST204 error code 12... what next?

  1. #1
    Long Time Reader Backyard Mechanic willwal98's Avatar
    Join Date
    Dec 2005
    Location
    Queensland
    Posts
    377

    Default ST204 error code 12... what next?

    Hey guys,

    My little sister has an ST204 that's been causing me some headaches. A few weeks ago she went home for lunch (about a 10 minute drive) and the car would not start when she tried to go back to work (about 30 mins rest, turned over just fine). The problem was intermittent but I got a code 12 which seemed to be ignition problems. I changed the distributor cap and rotor button and it ran fine for a couple of weeks.

    Yesterday she went to work, didn't go home for lunch but the car wouldn't start to go home after work. Rechecked the codes and it's still giving a 12 and the car has no spark. I have since tried a working set of leads, plugs and the ignitor and it's still the same.

    I am leaning towards a distributor problem but i'm keen to get some opinions from you guys before I rip it out... any ideas?
    Hello.

  2. #2
    Fuel Economy Warrior Carport Converter Vios-GT_07's Avatar
    Join Date
    Mar 2006
    Location
    WA
    Posts
    1,720

    Default Re: ST204 error code 12... what next?

    common fault is the distributor.. but if it's anything like a 5S camry, it's the crank angle sensor that's stuffed as well.. if you're really unlucky, they're both stuffed.
    Research has shown child in front seat causes accidents, accident in back seat causes child

  3. #3
    Long Time Reader Backyard Mechanic willwal98's Avatar
    Join Date
    Dec 2005
    Location
    Queensland
    Posts
    377

    Default Re: ST204 error code 12... what next?

    Are the distributors repairable or throw away? I'm assuming the CAS is in the distributor on these, right?
    Hello.

  4. #4
    Long Time Reader Backyard Mechanic willwal98's Avatar
    Join Date
    Dec 2005
    Location
    Queensland
    Posts
    377

    Default Re: ST204 error code 12... what next?

    OK, took the distributor to the auto elec for testing. He said the coil was bad, swapped that. The car started great, went for a little drive, all good. After about 20 mins the car would not start again and gave the error 12 once more.

    So I think I have done all I can, next step is to get it back to the auto elec so he can do some more testing.
    Hello.

  5. #5
    Long Time Reader Backyard Mechanic willwal98's Avatar
    Join Date
    Dec 2005
    Location
    Queensland
    Posts
    377

    Default Re: ST204 error code 12... what next?

    I took the car into the auto elec today and he said the ignitor is faulty. So now the search begins for a good one.

    Don't spose anyone watching this thread has one?
    Hello.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •