Radiator for KE30 3TC

[brucey]

Putting a 3TC into a KE30, so I'm looking for a suitable radiator. The top radiator hose for the 3TC is on the opposite side to the K-engine. Want to make it look original like a TE30/TE37.

What radiator would bolt straight in to the KE30 to suit the 3TC?
Was looking at a ta22 radiator, but the bolt hole separation is a bit different to the K-engine radiator:
(centre-to-centre)
TA22: ~565mm across, ~210mm top-to-bottom
KE30: ~487mm across, ~200mm top-to-bottom.

How about T18 or TA23 radiator?
Or will new holes need to be drilled, or make some metal adapter tags?

[emp?]

just use the stock ke30 one, and get the outlets swapped to the other side, most radiator shops will do this for you, its cheap and works well

[brucey]

OK, so they just cut the outlet off, seal it, and weld it on the other side? Straight forward as that?

[matty12]

yes,yes it is.

[Fusion]

Had a brand new raditor for a KE30 modified to suit. Like emp said, just get the outlets swapped, and at the same time maybe ask for a bung to be put in for temperature sensor for a thermo fan setup if your going that route to. Worked well for me

[brucey]

OK, thanks for the info.
Yeah might put in a temperature sensor:

http://www.toymods.net/forums/showthread.php?t=5125

If the outlet is going to be swapped might as well get a new radiator or have the old one reconditioned (3 core).