4agze diagnostic continous flash

[speed1ton]

Well warmed up the car switched off car then turned to pre ignition start and DID NOT START the engine and shorted the T and E terminals in the diagnostic box.
What I got was one continus flash with NO 2.5 or 4.5 second gaps.
Is this the normal 1. flash I'm after as I would have tought a 1 code would be
1 flash.....4.5secs .......1 flash..........4.5secs........1 flash.

[Z2TT]

Hi,

A continuous flash means there is no error codes.

[speed1ton]

Hi,

A continuous flash means there is no error codes.

Thanks lad thats good news.

[TERRA Operative]

The 'normal operation' flash is 1 flash every 3 seconds according to the Toyota TCCS manual.

You were getting a code 1 which is all systems normal.



http://www.jdmlevin.com/
Scroll down to the reference section, you'll find the TCCS manual for the 4AGE (it's the same for 4AGZE) as a .pdf.

[wilbo666]

Another reference

http://www.autoshop101.com/forms/h27.pdf

Cheers
Wilbo

[speed1ton]

Another reference

http://www.autoshop101.com/forms/h27.pdf

Cheers
Wilbo

On page 4 there is a diagram showing a 2 digit code 1..... and a 1 digit code1
There seems to be two different code 1's.
2 digit code =A continous flash with only a 0.26 second gap and a
1 digit code =1 flash with a 4.5 second gap followed by another 1 flash.
Is this just a variable of the one flash code but difers from one toyota model to another............

What I have is a 1 flash - 0.26 sec-1 flash - 0.26 sec. and so on and so on it does not stop for any other length of time only 0.26 secs

[TERRA Operative]

Yep, depends on model.


You got a 2 digit version of the Code 1, which means you're still all OK.

[speed1ton]

Yep, depends on model.


You got a 2 digit version of the Code 1, which means you're still all OK.

Great, that clears that up. Thanks for all the help guys. Top class

[TERRA Operative]

If you want to check your ABS system, I got the ABS diagnostic info on my site too.

[speed1ton]

Cheers fella.