you've certainly used a lot of its potential. any video?
also, is the motor RWD standard? what model volvo does it come in?
Hello i heard that everyone in australia thinks volvo engines are weak and suck!
here is the proof that the volvo engines have potential! i have a volvo b5234T engine in my corolla -81 ke70 514whp @6300rpm and 644nm @5250rpm
pictures at http://www.garaget.org/?car=88483
you've certainly used a lot of its potential. any video?
also, is the motor RWD standard? what model volvo does it come in?
previous:-> 74 KE20 4AGTE, 04 RZN149R, 01 AE112R, 01 KR42R, 84 E30 318i, 67 MINI DELUXE
current:-> 06 BF XR6T, MY13 ISUZU D-MAX 4X4
Volvo engine don't suck ... but they're usually owned by dentists and single-child soccer-mums so not really considered a performance vehicle ... more of a strangely-powered brick.
anyway ... OMG!
'644nm @5250rpm' - very impressive torque
... and how on earth did you fit a TK600 in the KE70 transmission tunnel!
one pic when i build space for my tremec transmission
http://img179.imageshack.us/my.php?image=p1190238.jpg
the engine comes from a volvo v70 -97 and is fwd
i have one build therd on a swedish forum
http://forum.turboperformanceclub.co...?f=56&t=193497
one pic when i build space for my tremec transmission
http://img179.imageshack.us/my.php?image=p1190238.jpg
the engine comes from a volvo v70 -97 and is fwd
i have one build therd on a swedish forum
http://forum.turboperformanceclub.co...?f=56&t=193497
one pic when i build space for my tremec transmission
http://img179.imageshack.us/my.php?image=p1190238.jpg
the engine comes from a volvo v70 -97 and is fwd
i have one build therd on a swedish forum
http://forum.turboperformanceclub.co...?f=56&t=193497
your build thread needs me to 'logga in'.
swedish people are funny, my son is one quarter swedish.
previous:-> 74 KE20 4AGTE, 04 RZN149R, 01 AE112R, 01 KR42R, 84 E30 318i, 67 MINI DELUXE
current:-> 06 BF XR6T, MY13 ISUZU D-MAX 4X4
There's a 6 cylinder version of this engine family (family name: whiteblock as opposed to the older redblocks) that was used RWD in the volvo 960/S90/V90 series from 1990 on. Actually it was the first of the series, 4/5 cylinder versions in FWD volvos following a few years later.
So it's not surprising it's doable to convert them to RWD, although this conversion isn't even using a 960 M90 transmission which could have been a logical choice. But perhaps not for this power/torque level.
Note there's also a T6, sold in the volvo S80 with 272 factory hp. Actually pretty interesting car, one of very few TRANSVERSE inline sixes ! Though I wouldn't want one cos it's FWD![]()
'73 TA12 Carina - pushrod power project
'77 TA14 Carina - 1GGTE swap in the works
'77 TA23 Celica - 1UZ swap abandoned, selling shell to someone with JZ plans...
Impressive stuff, would be quite a ride.. And a 2 door KE70 one of my favorite small toyota's ..
How does it sound ? Does it have the scream of the old Audi Quattro's, they had to my ears a unique & impressive sound, also a 5 cylinder combination as well ..
Did you have to fully rebuild the internals or are they quite strong to start with ? Might be something worth looking at ?
Do you know what sort of power one can one get out of a stocker with slight mods, boost etc ..
Regards ..
Rob ..
http://www.youtube.com/watch?v=J2Ug1RfMpB8
first start whith new camchafts
Rob, check out volvo forums like turbobricks and such for that type of info.
The T5(R) is a commonly modded car and will make good power on stock internals.
'73 TA12 Carina - pushrod power project
'77 TA14 Carina - 1GGTE swap in the works
'77 TA23 Celica - 1UZ swap abandoned, selling shell to someone with JZ plans...
isn't the t5R FWD as well though?
previous:-> 74 KE20 4AGTE, 04 RZN149R, 01 AE112R, 01 KR42R, 84 E30 318i, 67 MINI DELUXE
current:-> 06 BF XR6T, MY13 ISUZU D-MAX 4X4
stock engine with little bigger turbo like mitu T19 (v70R AWD) and max 1.3bar boost (bad standard rods) and uppgraded ECU aorund 330hpOriginally Posted by lexsmaz
my engine have forged JE- piston and H-beam rod more duration on camshafts and more mods but i have not drive on dyno yet!
my old engine (514whp) had standard internals only change to H-beam rods
Last edited by primer; 09-05-2009 at 03:58 AM.
Yes, but somehow that doesn't keep people from modding itOriginally Posted by jono
![]()
There's also the R AWD. Could have been sweet if it wasn't so damn heavy... then again, nothing you can't fix with MORE power![]()
'73 TA12 Carina - pushrod power project
'77 TA14 Carina - 1GGTE swap in the works
'77 TA23 Celica - 1UZ swap abandoned, selling shell to someone with JZ plans...
Bookmarks