Page 1 of 5 123 ... LastLast
Results 1 to 15 of 61

Thread: Next car and engineering??

  1. #1
    But I have no carport? Carport Converter merc-blue's Avatar
    Join Date
    Dec 2005
    Location
    Victoria
    Posts
    1,738

    Default Next car and engineering??

    I have recently been considering a few options of my next car.
    I have a few requirements.
    needs to be reliable, user freindly (semi comfortable, 5 seat, some boot space etc)
    I have been given a very tired SV21 to drive so dont need immediate transport
    and lastly i would like to to be tough, i cop soo much greif because all my cars up to now have not been that respectable, both slow underpowered and with rough bodies
    weather tough means a few things either unexpected engine swaps, good power (200+HP at wheels) or just a really tidy clean classic cruiser.

    I wont be needing a daily as of november as im moving alot closer to work and will be able to ride to work.

    I have a few ideas but my concern is acheiving a legitamate roadworth status
    1GGTE corona as above seems to be have done a few times not overly difficult as most issues have been reported,
    3SGE AE82 again has been done not as common abit more work, and will require abit to get regged
    3SGZE or 3SGTE into the SV21 never seen it done shouldnt be impossibly hard and would certainly surprise a few
    (ST185 or later front cut made to fit the SV21)

    Or find a clean old orig cressie/corona/crown and bag it

    I have searched these forums and other forums for cars that have already been done and are for sale but i cant find any.

  2. #2
    Olde mechanic Carport Converter oldeskewltoy's Avatar
    Join Date
    Oct 2006
    Location
    oregon
    Posts
    1,417

    Default Re: Next car and engineering??

    SV25 - All-Trac Camry.

    What I'd do..... Mods would be - 5SFZE(C30 Rotrex) and Lexus ES250 shell
    Information is POWER... learn the facts!!

  3. #3
    But I have no carport? Carport Converter merc-blue's Avatar
    Join Date
    Dec 2005
    Location
    Victoria
    Posts
    1,738

    Default Re: Next car and engineering??

    sadly this is aus,
    never got the SV25 and getting it on the road legit would be near on impossible

  4. #4
    ten years gone Backyard Mechanic frostyadonis's Avatar
    Join Date
    Jul 2008
    Location
    Victoria
    Posts
    288

    Default Re: Next car and engineering??


    go luxo

    but drive carefully or this will happen

    yes im aware this car is not a toyota
    this is just an example- so no dissing nissans ok
    owner of 1 ta22 celica green but not hybrid

  5. #5
    I am crap as a Conversion King SilverRA23's Avatar
    Join Date
    Oct 2005
    Location
    VIC
    Posts
    2,144

    Default Re: Next car and engineering??

    merc.. what model corona would you be thinking of? I know of a free to good home one at the moment....it sounds like an rt13* from what the guy has told me - oh and it was his dad's and sounds like it fits the one gentleman owner bill
    Last edited by SilverRA23; 05-07-2009 at 12:06 PM.
    Now - RA23-WRX
    Gone-KE10-KE15-KE35-TA22-AE71-Charade-AE82-MS47-KE15-AE95-MX32
    Need club rego or a CAMS licence in VIC? Join TCCAV www.tccav.org.au

  6. #6
    anti blasphemy ! Carport Converter
    Join Date
    Jan 2006
    Location
    perth
    Posts
    1,346

    Default Re: Next car and engineering??

    sounds like your pefect car is a 1j cressi.
    i dont have a funny or cool signature.

  7. #7
    I make people cry Chief Engine Builder Draven's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    4,281

    Default Re: Next car and engineering??

    Quote Originally Posted by merc-blue
    i cop soo much greif because all my cars up to now have not been that respectable, both slow underpowered and with rough bodies
    not a really great reason to get into modified cars :\
    http://www.toymods.org.au/forums/showthread.php?t=7465
    Quote Originally Posted by xero View Post
    and of course campbell newman's completely fucking everything he touches so badly that he should be called dick fingers.

  8. #8
    Incompetent Automotive Encyclopaedia
    Join Date
    Mar 2006
    Location
    Brisbane
    Posts
    978

    Default Re: Next car and engineering??

    1GGTE corona as above seems to be have done a few times not overly difficult as most issues have been reported

    2.0lt engine, chassis also available with a 2.4lt engine. upgrade to 2.0lt turbo should be piss easy in any state. fairly straightforward conversion but don't expect any change from $6-$8k

    3SGE AE82 again has been done not as common abit more work, and will require abit to get regged
    A 3SGE into an AE82 is less work than a 1GGTE into a Corona. It should also be easier to register. Budget should come in about $3-$4k. Also, I have the engine & gearbox mounts to bolt this straight up so it makes it a pretty easy option too.

    3SGZE or 3SGTE into the SV21 never seen it done shouldnt be impossibly hard and would certainly surprise a few (ST185 or later front cut made to fit the SV21)
    This is probably your 'easiest' conversion as the 3SGTE will be a straight bolt-in (although what the fuck is a 3SGZE) although again don't expect a lot of change from $6-$8k.

    Or find a clean old orig cressie/corona/crown and bag it
    Assuming you can find something with a good body, then this is by far the best and cheapest option and you will most certainly get props for doing this. find something that doesn't need bodywork and is standard mechanically. A comprehensive suspension & braking overheaul (bushes, springs, shocks, modest brake upgrade with bolt on toyota crap) should set you back about $2k and as you're not doing anything with the body or mechanicals you'll be on the road literally in weeks and probably cheaper than the other options.

    Bear in mind that old cars can be hard to find parts for and are not much good for anything even remotely resembling handling.

    I have searched these forums and other forums for cars that have already been done and are for sale but i cant find any

    If you are buying someone else's car, I don't see why you would be stuck with the constraints of the particular vehicles you listed. Ebay, performanceforums, just cars magazine, unique carsales, unique cars mag, etc... I bet you can find a hundred cars in a week that are worth a look.
    Must.... avoid.... urge... to... upgrade... parts I haven't.... used.... yet.....

  9. #9
    Incompetent Automotive Encyclopaedia
    Join Date
    Mar 2006
    Location
    Brisbane
    Posts
    978

    Default Re: Next car and engineering??



    eg: thirty seconds on unique carsales. price a little high but if it's as good as he says then it's a nice hassle free car and will come in at around $10k once you've bargained a little and done brakes/suspension/whitewalls.
    Must.... avoid.... urge... to... upgrade... parts I haven't.... used.... yet.....

  10. #10
    Incompetent Automotive Encyclopaedia
    Join Date
    Mar 2006
    Location
    Brisbane
    Posts
    978

    Default Re: Next car and engineering??

    another couple of minutes

    1ggte, $3600

    Must.... avoid.... urge... to... upgrade... parts I haven't.... used.... yet.....

  11. #11
    Junior Member Conversion King timbosaurus's Avatar
    Join Date
    Feb 2006
    Location
    Melbourne
    Posts
    2,037

    Default Re: Next car and engineering??

    Merc, buy Em's AE101 Levin (don't tell her that I'm putting it up for sale ) and fit the ST185 3SGTE into it.

    Then later you can morph the ST185 rear xmember into it and have a sleeper EVO killer
    Current rides...
    2) White RA25ST
    1) Red RA28LT (NOW WITH 1G )

  12. #12
    umop apisdn Chief Engine Builder twentyEight's Avatar
    Join Date
    Jul 2006
    Location
    Queensland
    Posts
    3,108

    Default Re: Next car and engineering??

    Quote Originally Posted by timbosaurus
    Merc, buy Em's AE101 Levin (don't tell her that I'm putting it up for sale ) and fit the ST185 3SGTE into it.

    Then later you can morph the ST185 rear xmember into it and have a sleeper EVO killer
    Shit that's a cool idea!

    I love the look of the Levin's, but hate that they're FWD.

    AWD 3S-GTE Levin FTMFW!!!!
    ([][][]II--LT--II[][][])


    Green '77 RA28 Celica - VVTi V8 Goodness...

  13. #13
    Estranged Member Chief Engine Builder mullett's Avatar
    Join Date
    Jan 2006
    Location
    WA
    Posts
    3,369

    Default Re: Next car and engineering??

    It sounds like you're looking at some vastly varied options...What's more important to you? What people think of your car, or the way it drives? Either one's valid...But a bagged cruiser is a lot different to a 3SGE corolla, or a turbo Corona. What do you use the car for, what is important to you in a car, and what kind of driving are you likely to be doing?

    If you're mostly interested in what people think of your car, get a mid-90s BMW. Comfortable, prestige and *generally* reliable...

    -RM.

  14. #14
    But I have no carport? Carport Converter merc-blue's Avatar
    Join Date
    Dec 2005
    Location
    Victoria
    Posts
    1,738

    Default Re: Next car and engineering??

    Mullet,
    Im looking at a range of cars due to what i want,
    I want somthing reasonably comfortable and driveable, also straight and clean.
    It needs to have either roof racks, a tow bar or a big boot.
    if it seats 4 than 4 doors would be nice but not 100% nessicary.
    and i want it to be somthing i enjoy owning.
    the AW11 is a great car but driving it to and from work every day is a PITA, i cant do the shopping on the way home if i pickup the missus on the way through because there is no room. i open packets of toilet paper just to get the suckers into the boot cause the pack wont fit. if i only drove it on weekends than i would love it and if i could some how find a way to transport a bike on it that would be even better.

    Even stright clean early hilux (RN20ish) would be good

  15. #15
    Gary Motorsport Inc. Too Much Toyota takai's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    5,543

    Default Re: Next car and engineering??

    MX83 with a 1UZ, 2JZ or 1JZ.
    Or UZS131 Wagon
    That is all.
    -Chris | Garage takai - Breaking cars since 1998
    Sparky - AE86 IPRA Racer | RZN149 Hilux - Parts and Car Hauler
    I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •