1ggte setting cam timing

[celicapain]

Howdy happy toymodders,
In the midst of changing the timing belt on my soarer after it snapped a couple of teeth off, and im not sure how to set the cam timing. I see the marks(dots) on the cam sprockets, im assuming I set them both so the mark is vertical with cylinder 1 at TDC? any input appreciated, thanking you muchly!

[Kedderz]

hi mate use the 1ggeu manual below, its the same, thats how I did mine.

http://www.forcedfedperformance.com....%20English.rar

[SillyCarS]

set crank to TDC

set cams to the lines on the backing plate

rotate and if it is one tooth out you did it wrong

[Big rob]

1st make sure the mark on the timing pulley is actually at TDC.

2nd Use the TSRM for detailed description.

[CLG]

set crank to TDC.

set cams to the lines on the backing plate.

release the tensioner pulley and install new belt.

Retension the tensioner.

Rotate the crank at least twice to bring the cam points back up to check they line up with the lineup points - if it is one tooth out you did it wrong

Added for you.

[SillyCarS]

thanks crint

and biggest thing of all, dont forget the washer jigger that keeps the belt on the crank pulley