Reply With Quotespacer ring .5mm thick? been done many times and shitloads easier than sleeving stubs or hubs.
Hubs.
I want hubs with a 55mm bore on the front of my AW11. Most hubs from the rear of AE102+ should do the job? I realise I may have to sleeve the bearing to get it to fit properly.
If not, what's the easiest way to make your hub bore 1mm bigger, short of machining the rotors out 4mm and having a 5mm spacer?
Cheers.
The above opinion is just that - my opinion. It is not shared by any business that I am currently or have previously been involved with, nor any of their employee's.
Re: Hubs.
spacer ring .5mm thick? been done many times and shitloads easier than sleeving stubs or hubs.
Originally Posted by WHITCHY
Re: Hubs.
Interesting, talked to a fabricator the other day and he said it was too thin. If it isn't, it sure makes my job easier...
The above opinion is just that - my opinion. It is not shared by any business that I am currently or have previously been involved with, nor any of their employee's.
Re: Hubs.
Why not try swapping the bearing out? What is the design of the hub?
Posting Permissions
Bookmarks