WTD: Base tune for EMS Stinger ecu

**1jzDan** · 10-04-2009, 05:26 PM

Hey guys,

I have a ems stinger installed on my 1j and have recently swapped to Sard 650cc injectors and a gt35r etc etc.

Just wonder if anyone has a base tune I could use just to make it easier to move the car around?

Cheers Dan.

**Hibba** · 10-04-2009, 11:38 PM

Easiest way to get it moveable would be to plug in with your laptop etc, and drop the injector percentages to something where it runs a bit better, it will get it mobile but i wouldnt go trashing on it.

**The Real Roadrunner** · 11-04-2009, 03:34 AM

what version stinger? i may be able to help out with some screen shots if its a version 4, mine only has 440's but it should get it running reasonably.

cheers
linden

**1jzDan** · 11-04-2009, 09:57 AM

Yeah I havent got it ready to start yet but just thought Id be prepared for when it is ready ha.

Its a 4424 Stinger, So its a few years old now.

Thanks guys, Dan

**The Real Roadrunner** · 11-04-2009, 11:22 PM

4424 is the standard stinger (they are all the same from that standpoint), the numbers stand for 4 ign 4 inj and 24 pin plug.

Whats the serial number on the ecu? it should start with V#######

V1, V2, V3 and V4 tell you the version.

cheers
linden

**ra_28** · 12-04-2009, 07:33 PM

Will this help

http://www.enginemanagement.com.au/showmap.php?id=41

Cheers
Alex

**Pimpin_1JZ** · 12-04-2009, 08:54 PM

From what I've been told they actually come with a base map but needs to be "unlocked".

**1jzDan** · 19-04-2009, 03:03 PM

Originally Posted by The Real Roadrunner

4424 is the standard stinger (they are all the same from that standpoint), the numbers stand for 4 ign 4 inj and 24 pin plug.

Whats the serial number on the ecu? it should start with V#######

V1, V2, V3 and V4 tell you the version.

cheers
linden

The code on the side says: ST332162/ VER300

Thread: WTD: Base tune for EMS Stinger ecu

Thread Tools