rwd 3sge. What dizzy???

**egg_83** · 09-04-2009, 05:46 PM

--------------------------------------------------------------------------------

A mate and i are putting a ser.1 3s in his ae71 and were just going to mount the engine forward so the dizzy will clear the fire wall.

But i was curious as to what others have done to change the dizzy so the engine can be mounted further back?

Iv heard that you can use the internals of some sort of mitsubishi dizzy mated to the 3s one to run external coils with a ignition ecu. But what type of mitsubishi dizzy?

**metcap** · 09-04-2009, 09:10 PM

here's what I did http://forums.cjb.net/cccm-about560.html ,thats a modded dizzy with 4g63 (VR4/EVOs?) internals. Whatever ecu you'll be using make sure it supports the coded trigger wheel in the mitsu dizzy or else you'll be building junk. Happy modding

**egg_83** · 10-04-2009, 08:04 AM

cheers mate ill look into this a little closer.

any other ideas guys?

**terryo** · 10-04-2009, 08:40 AM

i have done several of these and used the toyota dissy

**Screamn_Sleeka** · 10-04-2009, 08:49 AM

Originally Posted by terryo

i have done several of these and used the toyota dissy

What does that mean?

You use a toyo dissy and relocated it? or you kept the original position but mounted the whole engine forward? Some people dont like engines hanging out there front grill.

**terryo** · 10-04-2009, 09:26 AM

i relocated it to the front. made special adapter to drive off the front of the cam, shortened the dissy drive shaft and made a alloy bracket to mount it all and have normal dissy adjustment. I have a workshop and do this sort of stuff all-day., everyday