unblock the ISCV.. if its working you will want good idle.
AFAIK the pipe connects between the turbo and filter
with my ISCV on a custom inlet i dont have any type of pipe on it and it idles fine
Hey guys.
got a slight problem.
brought my engine with out turbos or manifolds. SO i went single turbo.
So they were a few disconnect things and i guessed where they went.
I was told to block ISCV valve up. so i capped it i left it plugged in though. Cause i couldnt work out where it went.
I know it runs a pipe round the back of the head an goes to somewhere around the original twin setup.
said ISCV in pics
This is where its located
WHERE THE HELL DO I RUN IT TO LOL!
im guessing into the intake pipe on my single turbo? Pipe with filter nagning off it.... not shown in pics.
Everything was working fine with the stock ecu in and running 6 psi. Now its tuned its gone to shit. Now when i drop the car into any gear from park it stalls. and when i do manage to get it driving its fine but when i pull up to a set of lights and stop etc it stalls also.
Im told its cause this is not connected up.
This what my tuner told me. its an idle up he said.
please help ..... its a real pig to drive like this
any help aprreciated. cheers![]()
JZX90 Lovin'
unblock the ISCV.. if its working you will want good idle.
AFAIK the pipe connects between the turbo and filter
with my ISCV on a custom inlet i dont have any type of pipe on it and it idles fine
87' z20 Soarer - 1jz Gt35r -
iscv can just run to air mate, add a filter on itthough!
13.39sec @ 110.86mph.
265rwkw Supra (and climbing)
Originally Posted by MR 1JZ
so if i just remove the cap i put on the ISCV and add a mini pod filter it should be fine?
would this be why my car stalls with the auto?
JZX90 Lovin'
remove cap and go for a test drive for yoursef but you will need this for cold start and for toyotas shitty idle control.Originally Posted by TasCressida
13.39sec @ 110.86mph.
265rwkw Supra (and climbing)
Originally Posted by MR 1JZ
yeah its cold start is shit. this would explain why. when i get it back ill go for a drive an fiddle with it.
do they have any adjustment ? and how if so.
or is this done thru my aftermarket ecu?
JZX90 Lovin'
what ecu you using stocko or other?
unblock it put a filter on it and i think your problem will be resolved.
13.39sec @ 110.86mph.
265rwkw Supra (and climbing)
Originally Posted by MR 1JZ
im using An adaptronic 420 ecu.
JZX90 Lovin'
its probly not hooked up to the ecu so you wouls have to
A raise the idle and forget about the valve or
B hook it up to the ECU properly and get it tuned to suit.
cheers
linden
Originally Posted by WHITCHY
cheers linden....
will call my wiring guy and see wether we actually wired it up to the adaptronic.
if it isnt wired up is that meaning it stuck open or closed?
i tried up idle but when i go to take of in D-rive it stalls still.... this car is shitting me lol.
if stomp the go pedal its fine .... it hesitates then goes fine.
JZX90 Lovin'
any other ideas i can try?
any other thoughts .. haven tried it unplugged as yet.
JZX90 Lovin'
try adjusting the throttle blade/butterfly more to allow more air in on idle?
87' z20 Soarer - 1jz Gt35r -
hey guys.
Played with it today.
Ran it with no hose i.e to aptmosphere
it was perfect till it warmed up. it drove fine ..engaged gear and revved fine.
As soon as my cold start Rev limit dropped out it became its piggish self.
Thinking its underlying problem with my adaptronic tune ..... there seems to be a lot of these ive found.
im shitty with my power for my supporting mods so now ive opted for a retune this weekend and to sort this other drama.
Forey may i ask that i have a look at your setup maybe in person. being one of few locals running a 1JZ, can u PM me your number please. id love to have a look over it.
just cant wait to drive my car to its full potential lol.
cheers
JZX90 Lovin'
i think the best and easiest way to overcome this problem would be when you pull up at the lights just sit there and do a foot on, untill the lights go green (assuming you can see the traffic lights). I can see no feasable floor in this plan.
As forey said it should run to the inlet pipe for your turbo. How fast does it idle? when say in park?
sounds like its a tuning issue let us know how you go.
Do the 1js run a seperate idle up valve for things like air con etc?
sure thing man, are you around the hobart area?Originally Posted by TasCressida
my ISCV is bolted on the under side of my plenum... making it virtually impossible to bolt on and off/do anything with really
87' z20 Soarer - 1jz Gt35r -
Bookmarks