Page 1 of 2 12 LastLast
Results 1 to 15 of 21

Thread: 1JZ ISCV Help please.

  1. #1
    Your mum loves my Grease Monkey TasCressida's Avatar
    Join Date
    Apr 2008
    Location
    tasmania
    Posts
    142

    Default 1JZ ISCV Help please.

    Hey guys.

    got a slight problem.
    brought my engine with out turbos or manifolds. SO i went single turbo.
    So they were a few disconnect things and i guessed where they went.
    I was told to block ISCV valve up. so i capped it i left it plugged in though. Cause i couldnt work out where it went.
    I know it runs a pipe round the back of the head an goes to somewhere around the original twin setup.

    said ISCV in pics



    This is where its located



    WHERE THE HELL DO I RUN IT TO LOL!
    im guessing into the intake pipe on my single turbo? Pipe with filter nagning off it.... not shown in pics.

    Everything was working fine with the stock ecu in and running 6 psi. Now its tuned its gone to shit. Now when i drop the car into any gear from park it stalls. and when i do manage to get it driving its fine but when i pull up to a set of lights and stop etc it stalls also.
    Im told its cause this is not connected up.
    This what my tuner told me. its an idle up he said.

    please help ..... its a real pig to drive like this

    any help aprreciated. cheers
    JZX90 Lovin'

  2. #2
    JZZ20 Backyard Mechanic forey's Avatar
    Join Date
    Mar 2007
    Location
    TAS
    Posts
    274

    Default Re: 1JZ ISCV Help please.

    unblock the ISCV.. if its working you will want good idle.
    AFAIK the pipe connects between the turbo and filter

    with my ISCV on a custom inlet i dont have any type of pipe on it and it idles fine
    87' z20 Soarer - 1jz Gt35r -

  3. #3
    Junior Member Backyard Mechanic xistant's Avatar
    Join Date
    Mar 2009
    Location
    victoria
    Posts
    458

    Default Re: 1JZ ISCV Help please.

    iscv can just run to air mate, add a filter on itthough!
    13.39sec @ 110.86mph.
    265rwkw Supra (and climbing)
    Quote Originally Posted by MR 1JZ
    when are people going to admit to the fact that torsens are totally gay for serious trackwork?

  4. #4
    Your mum loves my Grease Monkey TasCressida's Avatar
    Join Date
    Apr 2008
    Location
    tasmania
    Posts
    142

    Default Re: 1JZ ISCV Help please.

    so if i just remove the cap i put on the ISCV and add a mini pod filter it should be fine?

    would this be why my car stalls with the auto?
    JZX90 Lovin'

  5. #5
    Junior Member Backyard Mechanic xistant's Avatar
    Join Date
    Mar 2009
    Location
    victoria
    Posts
    458

    Default Re: 1JZ ISCV Help please.

    Quote Originally Posted by TasCressida
    so if i just remove the cap i put on the ISCV and add a mini pod filter it should be fine?

    would this be why my car stalls with the auto?
    remove cap and go for a test drive for yoursef but you will need this for cold start and for toyotas shitty idle control.
    13.39sec @ 110.86mph.
    265rwkw Supra (and climbing)
    Quote Originally Posted by MR 1JZ
    when are people going to admit to the fact that torsens are totally gay for serious trackwork?

  6. #6
    Your mum loves my Grease Monkey TasCressida's Avatar
    Join Date
    Apr 2008
    Location
    tasmania
    Posts
    142

    Default Re: 1JZ ISCV Help please.

    yeah its cold start is shit. this would explain why. when i get it back ill go for a drive an fiddle with it.

    do they have any adjustment ? and how if so.
    or is this done thru my aftermarket ecu?
    JZX90 Lovin'

  7. #7
    Junior Member Backyard Mechanic xistant's Avatar
    Join Date
    Mar 2009
    Location
    victoria
    Posts
    458

    Default Re: 1JZ ISCV Help please.

    what ecu you using stocko or other?

    unblock it put a filter on it and i think your problem will be resolved.
    13.39sec @ 110.86mph.
    265rwkw Supra (and climbing)
    Quote Originally Posted by MR 1JZ
    when are people going to admit to the fact that torsens are totally gay for serious trackwork?

  8. #8
    Your mum loves my Grease Monkey TasCressida's Avatar
    Join Date
    Apr 2008
    Location
    tasmania
    Posts
    142

    Default Re: 1JZ ISCV Help please.

    im using An adaptronic 420 ecu.
    JZX90 Lovin'

  9. #9
    Forum Sponsor Conversion King
    Join Date
    Dec 2006
    Location
    NSW
    Posts
    2,583

    Default Re: 1JZ ISCV Help please.

    its probly not hooked up to the ecu so you wouls have to

    A raise the idle and forget about the valve or
    B hook it up to the ECU properly and get it tuned to suit.

    cheers
    linden
    Quote Originally Posted by WHITCHY
    Prefer someone around the Sydney area but will travel a few hours for a good box!

  10. #10
    Your mum loves my Grease Monkey TasCressida's Avatar
    Join Date
    Apr 2008
    Location
    tasmania
    Posts
    142

    Default Re: 1JZ ISCV Help please.

    cheers linden....
    will call my wiring guy and see wether we actually wired it up to the adaptronic.

    if it isnt wired up is that meaning it stuck open or closed?
    i tried up idle but when i go to take of in D-rive it stalls still.... this car is shitting me lol.
    if stomp the go pedal its fine .... it hesitates then goes fine.
    JZX90 Lovin'

  11. #11
    Your mum loves my Grease Monkey TasCressida's Avatar
    Join Date
    Apr 2008
    Location
    tasmania
    Posts
    142

    Default Re: 1JZ ISCV Help please.

    any other ideas i can try?
    any other thoughts .. haven tried it unplugged as yet.
    JZX90 Lovin'

  12. #12
    JZZ20 Backyard Mechanic forey's Avatar
    Join Date
    Mar 2007
    Location
    TAS
    Posts
    274

    Default Re: 1JZ ISCV Help please.

    try adjusting the throttle blade/butterfly more to allow more air in on idle?
    87' z20 Soarer - 1jz Gt35r -

  13. #13
    Your mum loves my Grease Monkey TasCressida's Avatar
    Join Date
    Apr 2008
    Location
    tasmania
    Posts
    142

    Default Re: 1JZ ISCV Help please.

    hey guys.
    Played with it today.
    Ran it with no hose i.e to aptmosphere
    it was perfect till it warmed up. it drove fine ..engaged gear and revved fine.
    As soon as my cold start Rev limit dropped out it became its piggish self.
    Thinking its underlying problem with my adaptronic tune ..... there seems to be a lot of these ive found.
    im shitty with my power for my supporting mods so now ive opted for a retune this weekend and to sort this other drama.

    Forey may i ask that i have a look at your setup maybe in person. being one of few locals running a 1JZ, can u PM me your number please. id love to have a look over it.

    just cant wait to drive my car to its full potential lol.

    cheers
    JZX90 Lovin'

  14. #14
    Toyotard Conversion King Cuts's Avatar
    Join Date
    Jul 2006
    Location
    Tasmania
    Posts
    2,932

    Default Re: 1JZ ISCV Help please.

    i think the best and easiest way to overcome this problem would be when you pull up at the lights just sit there and do a foot on, untill the lights go green (assuming you can see the traffic lights) . I can see no feasable floor in this plan.

    As forey said it should run to the inlet pipe for your turbo. How fast does it idle? when say in park?

    sounds like its a tuning issue let us know how you go.
    Do the 1js run a seperate idle up valve for things like air con etc?
    ST205 Group A Rallye GT-Four 307kw atw @23 psi on 98oct, Now on E85.

    1973 TA22

  15. #15
    JZZ20 Backyard Mechanic forey's Avatar
    Join Date
    Mar 2007
    Location
    TAS
    Posts
    274

    Default Re: 1JZ ISCV Help please.

    Quote Originally Posted by TasCressida
    hey guys.
    Played with it today.
    Ran it with no hose i.e to aptmosphere
    it was perfect till it warmed up. it drove fine ..engaged gear and revved fine.
    As soon as my cold start Rev limit dropped out it became its piggish self.
    Thinking its underlying problem with my adaptronic tune ..... there seems to be a lot of these ive found.
    im shitty with my power for my supporting mods so now ive opted for a retune this weekend and to sort this other drama.

    Forey may i ask that i have a look at your setup maybe in person. being one of few locals running a 1JZ, can u PM me your number please. id love to have a look over it.

    just cant wait to drive my car to its full potential lol.

    cheers
    sure thing man, are you around the hobart area?
    my ISCV is bolted on the under side of my plenum... making it virtually impossible to bolt on and off/do anything with really
    87' z20 Soarer - 1jz Gt35r -

Similar Threads

  1. 1JZ vs 7M alternator useful info and pics
    By Ribfeast in forum Tech and Conversions
    Replies: 30
    Last Post: 22-06-2009, 05:10 PM
  2. 7MGTE ISCV circuit on ECU board?
    By Negative Boost in forum Tech and Conversions
    Replies: 13
    Last Post: 11-05-2007, 05:44 PM
  3. 1jz and Haltech e6k
    By OldCel77 in forum Tech and Conversions
    Replies: 11
    Last Post: 10-10-2006, 05:25 AM
  4. 7MGTE ISCV Dilemma
    By Negative Boost in forum Tech and Conversions
    Replies: 2
    Last Post: 05-10-2006, 08:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •