1jz Iscv dramas

[Maverick]

I`m trying to figure out how I can wire up a 6-pin 1jz Iscv. My car runs an ems v2 but as all aux outputs are used i`m thinking of wiring up a timed circuit to open the valve and then close it after say 5 mins when the car warms up...

anybody got any ideas on this??

[Dieseltrain]

Might be easier to wire up a small stepper motor to the throttle blade for warm up purposes ?

[Maverick]

Just fixed my own problem, I used Wilbo`s diagram re the iscv to adjust the idle valve until it is cracked open enough to give a 850rpm or so idle and it allows enough air in to cold start fine... but thanks anyway