no one can help??
hey guys, new to the site, im just looking for a answer to a couple Q's.
got a ma71 supra with a 1jzgte. i hav got a e11v2 for it. just need to know a couple wires. for the crank angle sensor, cam angle sensor (between cyl 3 & 4) & factory 02 sensor. just need to know which colour wire does what. i can find much out. not even haltech can't help me. need to got the car going asap!!
thanks in advanced
KADE
no one can help??
The thick grey wires are the home(cam) and trigger(crank) wires.
The home wire is the thick grey wire with the black stripe
Home channel-
green- home
blue - ground
red - 12v
yellow isnt connected
Trigger is just straight grey thick wire with no stripe
Green isnt connected
Blue- ground
red- 12v
yellow- trigger
02 sensor is pin 12 on the smaller ecu plug
looking into the smaller plug on the ecu it is the second row down and 2nd pin in on the right
or looking into the ecu plug count the pins from left to right if thats easier
It says the o2 wire should be shielded too .
if you need anything else let me know.
Bookmarks