hey guys ,first post hey ,,, and the question is
the wife has a tarago with a 3y motor ,having major overheating troubles and i believe its a head gasket problem , now i recenty bought a 89 hiace that i am rebuilding that i has a blown motor ( planning on putting full new motor in it ) it had a new head put on the 4y which had only done 50km when the bearings let go destroying the motor ...
my plan if it works is to drop the 4y head on to the 3y motor ,are there any dramas on doing this ,are the head gaskets the same etc

also the 3y has a noisy lifter ( rattles when its cold ,goes pretty well away when warm ) so thinking of putting new lifters in at same time ,is this much of a job and also are they expensive

thanks in advance james