Wheere to get 3SGTE throttle body adapter?

[TERRA Operative]

Hey,

I've got a 3SGTE throttle body here I want to fit to my 4AGZE. I need an adapter to bolt to the filter side of the throttle body to allow me to attach a silicone bend, as the stock 3SGTE setup seems to have a bolt-on alloy bend like the stock 4AGZE.

Does anyone know where I can get one of these?

[Cuts]

They use a rubber/flanged fitting in stock config, they are about 60mm long or so, and bolt to the tb one end and have a hoseclamp on the other.

gen2 or gen3? (gen 2 is a 55mm tb gen3 is 60mm)

I have a couple of gen2 adapters kicking around i could shoot your way if you need one.

[TERRA Operative]

The butterfly in mine is 55mm, the intake side is 58mm.

If you've got a spare one I could swap for some cash, that would be awesome.

[Cuts]

ok man ill get it tonight and send it 2mora, pm me and we shall get addresses and discuss cost.

[TERRA Operative]

Hey, could you get a pic, just to make sure it'll fit?

Thanks

[Cuts]

sure can.
its from a 185 so it'll fit.

[TERRA Operative]

That's what I want.

PM sent.