CCG Dyno Day 8 - Sunday 15 February 2009

[JustenGT8]

Nah I think there was a poetry reading session on at Tilleys and they went to check out the hawt lesbians

Justen reckons after fitting a twin turbo 1UZ into a GT4 he can convert anything

hey, at worst i get to see 2 chicks getting off

I wonder what a full spool is like on the dyno?

[1JZ-Rolla]

hey, at worst i get to see 2 chicks getting off

Depending on your interpretation of 'chicks'

I wonder what a full spool is like on the dyno?

I heard they are bad az bro, causes understeer at slow speeds, might slide of the front rollerz

[YLD-16L]

I wonder what a full spool is like on the dyno?

Same as my mini spool.

With a spool you're going to die on the first rainy day and you'll have to drive so slow everywhere in the dry or you'll spin off the road and die with a spool. Spools are death traps and everytime you fit one to a car a preist becomes a pedo.

[JustenGT8]

I have clearly missed a classic Toymods threads on spoolage?

no weird hopping around etc then? good to hear

[JustenGT8]

Depending on your interpretation of 'chicks'

Post #1443

http://www.toymods.net/forums/showth...=35241&page=73

[YLD-16L]

I have clearly missed a classic Toymods threads on spoolage?

no weird hopping around etc then? good to hear

No weirdness at all.

Sooooooo much BS about the characeristics of spools perpetuated by people who have never used one.

Haven't had one situation yet where it's been bad or annoying.

[JustenGT8]

No weirdness at all.

Sooooooo much BS about the characeristics of spools perpetuated by people who have never used one.

Haven't had one situation yet where it's been bad or annoying.

Yeah yeah, having run a locker in the 23 i don't buy into any of the misinformed bollocks.

just confirming that effectively tying the rollers together doesn't do anything weird, to either the dyno or wanting to spit the car off

[YLD-16L]

Yeah yeah, having run a locker in the 23 i don't buy into any of the misinformed bollocks.

just confirming that effectively tying the rollers together doesn't do anything weird, to either the dyno or wanting to spit the car off

Provided the rolling diameter on each side is same it's all good

[nerm]

there is a 1uz with a t78 turbonetics turbo on the side.. makes ~300rwkw on 10psi. its in a JZX90 in new zealand and can be seen on the speed hunters website

[Fiver]

Spools are death traps and everytime you fit one to a car a preist becomes a pedo. [/I]

Geez, there must be some spools getting around...