Hi all,

i need some help in setting up a 4AGZE as i believe that i have everything set up correctly but it has a slight miss everynow and again.

Is there any test that can be done to see if the igniter or the DLi coils are opperating correctly. The reason that i think that it is the ignition system is it will start and run fine from above 1200 rpm once it has finished the warm up cycle (warm up cycle the rpm jumps up to about 1800rpm and slowly comes down from there) but after 1200rpm the motor is missing and will continue to fall and eventually stall somewhere about the 500ish rpm mark.

Above the 1200rpm it misses every now and again but not bad and the motor feels smooth from this rpm upwards.

Any advice will help out
Thanks
Gav