st162 celica with 3sge engine

[spoilt]

hi, i just brought this car, and it got the check engine light on, any ideas, does any one have a pin out for the ecu as well..

[Dale]

st186 didn't exist?

Do you mean ST182?

[spoilt]

yes that is what i mean

[piggy]

is the check engine light always on? or does it come on after the car is running for a while?

[spoilt]

yeah it all was on.. it might be the 02 sensor not connected.. but i cant find where it goes.

when i start it, it idle really high at 2000rpm for a while then drops is that normal?

[piggy]

when my o2 sensor was playing up in my 162 the check engine light use to come on.

jack up the car and follow the exhaust system on a 162 it was near the firewall. have a look there mate

[piggy]

hope these help here is a pin out and a few other things for a gen2 3sge

http://www.fixya.com/cars/t931513-electrical_diagram

[spoilt]

i know were the o2 senosr is, it is on the manifold behind the radiator.. but i can find were it plugs into

[spoilt]

thanks for pin out

[spoilt]

i need a lot of parts for this car, do you know of like a online parts book or something so i can find them? and then order it.. cheers.

[piggy]

what parts are you after? and is it a 182 or a 162 you have?

[spoilt]

it is a 162.

i need all the metal window surrounds, for both left and right rear windows, i also need them for the boot lid, and the window seal for drivers door. i need both door trims. air box mount brackets, o2 sensor. and centre console. all air vents in dash

and that for starters

[piggy]

well since thats the case that pinout is incorrect

here is the correct pinout

http://www.geocities.com/MotorCity/P...Pins_3S-GE.gif

have you considered going to a wreckers to get the parts that you are after? there are plenty of 162's in them these days

[spoilt]

tried local wreckers , not worth pissing on.

[piggy]

fair enough o2 sensors you can get from your local repco supercheap etc etc there not too expensive