Page 1 of 14 12311 ... LastLast
Results 1 to 15 of 204

Thread: Toymods Dyno Day 18 - Sun, 18th January 2009

  1. #1
    Board Member Domestic Engineer DavGT4's Avatar
    Join Date
    Aug 2005
    Location
    NSW
    Posts
    632

    Exclamation Toymods Dyno Day 18 - Sun, 18th January 2009

    TOYMODS DYNO DAY 18!
    Proudly Supported by and held at:

    Silverwater Automotive Services
    1/141 Silverwater Rd Silverwater NSW 2128


    Cost:
    Members $45 (Both 2WD & 4WD).
    Non-Members $50 - 2WD, $65 - 4WD.


    The 18th Bi Annual Toymods DynoDay is scheduled for

    Sunday January 18th 2009. (8.30am Start !)


    Dyno Day 18 will once again be held at SAS in Silverwater. Dyno runs will be conducted in "Shootout" mode on a 4WD Dyno Dynamics Chassis Dyno.

    The day is open to members and non members alike, all vehicles are more than welcome. Remember - ANY vehicle can compete but to be eligible for the Trophies the car MUST be TOYOTA powered.

    Each vehicle will receive ONE Run on the 4WD Dyno.

    WE ARE STILL KEEN FOR A SPONSOR FOR THIS EVENT! Please contact Rod Try (0416 181 284) or Dav Hoban (0416 167 775) if you are interested in being the trophy Sponsor for Dyno Day 18!

    FOOD !
    The Day will start with a Bacon and Egg Sandwich for Breakfast at $2.50 for members and $3.50 for non-members

    For Lunch members will be able to buy a Sausage Sandwich for $2 and a cold can of drink for $1. Non members will be able to buy a Sausage Sandwich for $3 and a cold can of drink for $1. Rissole sandwiches will also be available at $3 for members and $4 for non members


    TROPHIES.

    There will be 6 primary categories with the overall Killerwatt King perpetual trophy going to the highest overall score of the day.

    Vehicles will be eligible to compete in only one PRIMARY class. The vehicle owner may choose to compete in a higher class but must do so before their Dyno Run.


    The 6 Primary classes are:

    Under 1800cc N/A Class
    1800cc - 2800cc N/A Class
    Over 2800cc N/A Class

    Under 1800cc Forced Induction Class
    1800cc - 2400cc Forced Induction Class
    Over 2400cc Forced Induction Class.


    The 2 Secondary Class Trophies are:

    Top 4WD
    Most improved.*

    *The Most improved Trophy is for the member with the Highest percentage kw increase on his/her car from the previous Dyno Day. It must be the same Vehicle and must be back to back Dyno days where the entrant was a Financial member for BOTH events.

    Class Trophies will be Presented at the end of the day for interstate competitors but otherwise will be presented at the following Toymods Monthly meeting, as will the Trophy for the Killerwatt King proudly sponsored by Redline Motorsport.


    TROPHY ELIGIBILITY.

    Only FINANCIAL Toymods members are eligible for trophies
    Only TOYOTA powered vehicles are eligible for trophies. At a bare minimum both the block and head must be of Toyota origin.
    Toymods Membership if due or new on the day must be paid BEFORE your dyno run.
    Only your FIRST Dyno Run counts towards the trophies. Should you wish to have a second run on the dyno you are more than welcome to do so. All are welcome to pay for a second run if time allows However Only the first run will be elegible for consideration. Time permitting Second Runs will be available at the end of the day.

    The Offical Judging team on the day will accept comment from each vehicle owner BEFORE the car is unstrapped from the Dyno. The Judges Decision regarding any possible re-run is Final.

    The judges decision is final and no correspondence will be entered into. No arguments will be tolerated with the Dyno Operators and any inappropriate behaviour will result in the offending competitor being asked to leave.

    CLASS SELECTION.

    The class eligibility for your vehicle is based on the presence of forced induction be it Turbo or Supercharger and the capacity of your engine. Since there is no way to determine an engine's internal modification capacity is based on the Original Factory capacity of the block used.

    There are no boost limits for the forced induction classes, the toymods car club does not handicap those people who have constructed an engine capable of supporting higher boost levels.

    There are also no restrictions on the type of fuel used on the day. Should you be running anything other than PUMP gas please advise the Dyno opperator PRIOR to your run.

    Should you have any further questions please feel free to contact the toymods board on [email protected]

    The Toymods car Club and SAS will not be responcible for any damage, no matter how arising during testing/moving of the vehicles.

    The Toymods Car Club Encourages Responsible driving to and from all of its events. Any unnecessary 'showboating' will result in the offender being unwelcome at any further Toymods events!!
    Last edited by TheToyman75; 06-12-2008 at 02:38 AM.
    Dav Hoban
    Board Member

    ST185... Lucifer! - he's back on the road again, woo!
    RA23... The purple poo! - less squeek, more rattle

  2. #2
    I make people cry Chief Engine Builder Draven's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    4,281

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    I'm there... just for the bacon & egg sandwich it's worth it
    http://www.toymods.org.au/forums/showthread.php?t=7465
    Quote Originally Posted by xero View Post
    and of course campbell newman's completely fucking everything he touches so badly that he should be called dick fingers.

  3. #3
    Board Member Domestic Engineer DavGT4's Avatar
    Join Date
    Aug 2005
    Location
    NSW
    Posts
    632

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    dam straight...!!
    Dav Hoban
    Board Member

    ST185... Lucifer! - he's back on the road again, woo!
    RA23... The purple poo! - less squeek, more rattle

  4. #4
    busy adding lightness Too Much Toyota MR22ZZ's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    7,213

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    hopefully I should be there... should also hopefully be the last dyno under 4A-GE power
    Past Toyotas - Snow White (TA23), Blue Stivo (ZZE123)
    Current Toyotas - Hamster (AW11)
    Quote Originally Posted by X kyle X View Post
    the aw11 is rougher and more angular so it's sex Appel is more that of Sylvester stalone rather then brad pitt

  5. #5
    Junior Member Too Much Toyota RONA's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    7,493

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    Should be there, will get a base figure for the new car.
    If in doubt power out

  6. #6
    1941cc 2T-G Domestic Engineer w810sc's Avatar
    Join Date
    Nov 2005
    Location
    nsw
    Posts
    782

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    will be there again.
    deepdishfactory
    2T-G - Half the valves but twice the fun.

  7. #7
    That's me before i was a Conversion King -GT-'s Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    2,445

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    Fark, time for this already??
    Quote Originally Posted by MR22ZZ
    hopefully I should be there... should also hopefully be the last dyno under 4A-GE power
    Again? Is this the 2nd or 3rd 'last' 4A dyno day for you?
    Quote Originally Posted by RONA
    Should be there, will get a base figure for the new car.
    Base? To compare to what? Are you suggesting you're modifying this one?
    AE93 SX 20V - Next Wakefield track day is 13th of November 2015!
    1:15.47 at Wakefield Park | 1:59.45 at Eastern Creek GP | 1:08.81 at SMP South | 2:04.77 at Phillip Island
    Toymods Club Member

  8. #8
    Toymods Club Member Conversion King big_zop's Avatar
    Join Date
    Sep 2006
    Location
    NSW
    Posts
    2,162

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    Quote Originally Posted by -GT-
    Again? Is this the 2nd or 3rd 'last' 4A dyno day for you?
    I can remember Mos going a few times with his standard IS in some of the records.

    I will be there this year, to renew my mebership at the least but would like to run something different to last time.

  9. #9
    busy adding lightness Too Much Toyota MR22ZZ's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    7,213

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    Quote Originally Posted by -GT-
    Fark, time for this already??

    Again? Is this the 2nd or 3rd 'last' 4A dyno day for you?

    Base? To compare to what? Are you suggesting you're modifying this one?
    lol, I knew someone would pipe up... but things are looking MUCH more promising for things to happen in the next 6 months.
    Past Toyotas - Snow White (TA23), Blue Stivo (ZZE123)
    Current Toyotas - Hamster (AW11)
    Quote Originally Posted by X kyle X View Post
    the aw11 is rougher and more angular so it's sex Appel is more that of Sylvester stalone rather then brad pitt

  10. #10
    Junior Member Grease Monkey nilprospects's Avatar
    Join Date
    Sep 2008
    Location
    qld
    Posts
    63

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    i wish there were toymods events on the gold coast~~

  11. #11
    Junior Member Too Much Toyota RONA's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    7,493

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    Quote Originally Posted by -GT-
    Base? To compare to what? Are you suggesting you're modifying this one?
    Before & after getting exhaust done. It needs to actually sound like a V8. Hell it doesn't make any noise at the moment.
    If in doubt power out

  12. #12
    Junior Member Chief Engine Builder De@No's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    3,359

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    Might come along to this..throw the car on the dyno for the sake off it..
    Z20- SOLD

  13. #13
    Junior Member Conversion King whatthe?'s Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    2,754

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    Quote Originally Posted by RONA
    Before & after getting exhaust done. It needs to actually sound like a V8. Hell it doesn't make any noise at the moment.
    Dont go to the place that did the exhaust on your MA61

    I'm sure I'll turn up to watch everyone elses cars run.... like usual
    Project megap00 - Gave up and sold up. Money tree died

  14. #14
    busy adding lightness Too Much Toyota MR22ZZ's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    7,213

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    booooo, I wanna see the Audi on the rollers
    Past Toyotas - Snow White (TA23), Blue Stivo (ZZE123)
    Current Toyotas - Hamster (AW11)
    Quote Originally Posted by X kyle X View Post
    the aw11 is rougher and more angular so it's sex Appel is more that of Sylvester stalone rather then brad pitt

  15. #15
    I definitely ain't a Chief Engine Builder wagonist's Avatar
    Join Date
    Jul 2005
    Location
    NSW
    Posts
    3,275

    Default Re: Toymods Dyno Day 18 - Sun, 18th January 2009

    I'm aiming to be there, assuming that Mr Toyota has pulled his finger out & brought me some new panels for my car by then...

    I'd really like to get a figure in triple digits, but seeing as I'm driving an extra pair of wheels... Might need some dry ice or fire extinguisher assistance on the interheater

Similar Threads

  1. Toymods Sponsorship
    By TheToyman75 in forum Toymods Car Club Membership and Feedback
    Replies: 2
    Last Post: 31-05-2008, 01:34 PM
  2. Toymods Dyno Day 14 - Sunday, January 21st
    By DavGT4 in forum Previous NSW Events
    Replies: 250
    Last Post: 22-01-2007, 08:11 PM
  3. Toymods Dyno Day 13 - Sunday, July 2nd
    By DavGT4 in forum Previous NSW Events
    Replies: 362
    Last Post: 21-07-2006, 01:32 PM
  4. Dyno Day 12 - Sunday January 15th 2006
    By TheToyman75 in forum Previous NSW Events
    Replies: 224
    Last Post: 25-01-2006, 11:46 PM
  5. Replies: 6
    Last Post: 10-01-2006, 02:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •