Results 1 to 4 of 4

Thread: 18R oil squirter bolts

  1. #1
    Junior Member Grease Monkey
    Join Date
    Apr 2008
    Location
    South Australia
    Posts
    84

    Default 18R oil squirter bolts

    Has anyone got a diagram or knows where the bolts go for the oil squirters for timing chain are?

    Cheers,
    Stu

  2. #2
    Backyard Engineer Domestic Engineer airfireman1's Avatar
    Join Date
    Apr 2006
    Location
    WA
    Posts
    749

    Default Re: 18R oil squirter bolts

    The bolt goes behind the removable plate on the head. it has a small notch accross the end of the bolt and that has to face horizontaly.
    that is the only oil squirter for the chain as the bottom one is basicaly splash fed
    Cheers Dave
    Cheers Dave


    1977 RA28
    1972 TA22
    1984 Supra

  3. #3
    Junior Member Grease Monkey
    Join Date
    Apr 2008
    Location
    South Australia
    Posts
    84

    Default Re: 18R oil squirter bolts

    thanks heaps mate i still have a couple left, all i know is these go behind the timing case somewhere. Any ideas or should i just go 2 u pull it n pull an engine down?

  4. #4
    Backyard Engineer Domestic Engineer airfireman1's Avatar
    Join Date
    Apr 2006
    Location
    WA
    Posts
    749

    Default Re: 18R oil squirter bolts

    I dont quite understand what you are requiring , If you say you have a couple, you only need one. Are you rebuilding an 18rg or have you lost some parts? This model oil squirter is fairly specific to the 18rg and you will be battling to find one at the wreckers. You have to undo this squirter to remove the head, otherwise the timing chain cannot pass thru the head.
    Best you try and pick up a copy of the toyota 18r-g workshp manual, around $30.00 on ebay, they come up quite often. (the green bible)
    All will be revealed then.
    Cheers Dave
    Cheers Dave


    1977 RA28
    1972 TA22
    1984 Supra

Similar Threads

  1. 18r - 18rc front rear sump swap?
    By thdevilshands in forum Tech and Conversions
    Replies: 3
    Last Post: 15-11-2008, 08:08 PM
  2. 18r - 18rc Front Rear Sump Swap
    By thdevilshands in forum Tech and Conversions
    Replies: 2
    Last Post: 12-11-2008, 09:14 AM
  3. NEEDED: Thread Diameter and Pitch for 4AG squirter banjo bolts
    By oldeskewltoy in forum Tech and Conversions
    Replies: 5
    Last Post: 16-04-2008, 07:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •