Microtech lt12s to X6 Box Wiring

[131OWN]

I have a Question regarding "X6 Box" Which I'm installing on a 1jzgte, the IGN Loom from the LT12s to the X6 does not have the 6-Pin AUX connector on the X Box end of the loom, there are just 6 grey striped wires. I have purchased a plug so I can plug them into the X Box, I just need to know what Grey wire goes where.

Now looking at the X6 IGN Box where the 6-Pin AUX Connector goes in, it looks like this. 2 Rows, 3 pins per Row

A B C
D E F

Remember these are to inputs to X6 Box from the LT12s, what grey wire goes where? the wire colours are.....

Grey with Red Stripe which triggers the ignitor for Cyl 1
Grey with Green Stripe which triggers the ignitor for Cyl 2
Grey with Blue Stripe which triggers the ignitor for Cyl 3
Grey with Orange Stripe which triggers the ignitor for Cyl 4
Grey with White Stripe which triggers the ignitor for Cyl 5
Grey with Black Stripe which triggers the ignitor for Cyl 6

[SillyCarS]

sick! i need this info as well, it'll be the same for a 1g ay?

[SillyCarS]

how did you get on with this?

[1JZ.747]

contact jon blanch at www.microtechefi.com