ETA to skidz?
camry, intermediate shafts.......note the engine mount that was used in the camry......
engine mount part removed......
gt4 cv joints.......top one still in box...bottom one has the camry int shaft bolted on
brand new, 3vz-fe, 3sgte, exedy heavy duty clutch kit.....thrust bearing not shown.....
clutch mounted and torque'd
gt4 top gearbox mount.... and 184 clutch fluid line....
camry e53 tranny all bolted up to engine and top body mount bolted..
2012 GT86
V6 powered 5th gen celica. Sadly moved on to build below
91 st185 aus delivered, V6 turb project,
2015 Kun26r hilux
ETA to skidz?
some more pics.....
gt4 shortshift kit.......care of EVL-184
ok ... here is the intermediate shaft, new bearing..... dropping of at the shop 2moro
2012 GT86
V6 powered 5th gen celica. Sadly moved on to build below
91 st185 aus delivered, V6 turb project,
2015 Kun26r hilux
Dude WTF, you are working under your car while it's sitting on a bed side table?
ha.......yeah... kinda.....
got axle stands holding the weight of the car............
table is the only thing i had that could hold the engine while i had cross members and mounts off while the new v6 tranny was being put in........
looks out of place i know but i wouldnt be under it if i didnt think it was safe.......there was bugger all weight on it... just there incase it decided to drop on me..lol.........
as i dont have a enginr crane and my jacks where used to remove gearbox.....
looks worse then it is
2012 GT86
V6 powered 5th gen celica. Sadly moved on to build below
91 st185 aus delivered, V6 turb project,
2015 Kun26r hilux
2012 GT86
V6 powered 5th gen celica. Sadly moved on to build below
91 st185 aus delivered, V6 turb project,
2015 Kun26r hilux
heh, exhaust nearly sounds like a 2J win
Ahhh.....A known face here....M sure plenty of people from OZcelica....but cant recognize anyone....
Looking Good mate.....
Oh...and thanks for the info on the Crossmember....
Got hold of one....Got most of the parts now.....
Thanks for all your help....
hey guys....... just some updated pics of what i been upto lately......
pics of new suspension and finished custom fibreglass air pod filter box.....
and new boot setup with woofer and battery box.......
still need to make sealed lid for battery box......
2012 GT86
V6 powered 5th gen celica. Sadly moved on to build below
91 st185 aus delivered, V6 turb project,
2015 Kun26r hilux
Good work on the airbox.. Would like to do something similar.
hi guys ... new update....
group A bonnet fitted, painted and looking fresh.....
still awaiting garnishes.....
garnishes turned up today and booked the engineer to inspect the conversion,
so close now, cant wait and i will definately be at toyfest this year
2012 GT86
V6 powered 5th gen celica. Sadly moved on to build below
91 st185 aus delivered, V6 turb project,
2015 Kun26r hilux
seen some in the uk, so will be looking for something over there..............
update on some new pics celica is finally ready to have engineer look at it, and its at the point where is as close to rego ready as i can get it............
so this is how it looks as of today.....
2012 GT86
V6 powered 5th gen celica. Sadly moved on to build below
91 st185 aus delivered, V6 turb project,
2015 Kun26r hilux
bonnet completed ready for engineering and roadworthy
conversion is complete and am awaiting engineering so i can rego......... keep tuned
2012 GT86
V6 powered 5th gen celica. Sadly moved on to build below
91 st185 aus delivered, V6 turb project,
2015 Kun26r hilux
awesomesauce!
3.0 badge is a subtle hint
whats the plan once its rego'd? Take it to the strip to see what she can lay down or just cruise for now?
Bookmarks