3VZ block measurements?

**Ashe** · 23-06-2006, 06:37 AM

Does anyone have the following measurements for the 3VZ block?

Front to rear. (Rear being where the flywheel goes.

)
center of motor mount to rear of motor.
from outside end of left motor mount to outside end of right motor mount( trying to figure how well it will fit on my RA65's crossmember)

Thanks for any help you can give.

**Norbie** · 23-06-2006, 02:26 PM

Try sending a PM to GiantTomato, he's in the process of doing a 3VZ conversion so should have the dimensions handy.

**wilbo666** · 23-06-2006, 02:34 PM

Yep what Norbie said.

They fit in a wheel barrow

(pics of his gearbox adapters!)

Cheers
Wilbo

**terra** · 23-06-2006, 05:04 PM

if you can fit a 4a/3s block into your car you can fit a 3vz into it, its just the headroom thats different. mount points are near identical to 5s.

**Ashe** · 23-06-2006, 10:43 PM

I know Giant tomato has one, I thought about the PM but thought that sharing the info with everyone would be a good turn.

yeah I'm really liking those adaptors, thats what has me asking. I've done a bit o research on most of the major swap issues I can see so now I'm getting down towards the important stuff that doesn't take tinkering.
I suppose I could go and measure my 5s BUT thats a bit like comparing apples to pears for me