AE101 4AGZE superstrut driveshafts

[L4AGZE]

I was looking into picking up a 4AGZE for my AE92 GTi. The donor car is a Levin AE101 with superstrut suspension and ABS. Would the driveshafts fit the hub or do I need non ABS driveshafts?

[blacktop]

does it come with the ABS controller?

I would be inclined to look into making the AE92 ABS equipped if you have all the right gear

[blacktop]

if thats to hard you should find the answer in here somewhere

http://www.toymods.net/forums/archiv...php/t-142.html

[L4AGZE]

I dont know if the ABS controller comes with it, I havent been down to have a look. I dont really want to get into something overly complicated though just looking for a straight swap.

Thanks for the link I have come across that before but its all about brake conversions and does not mention driveshafts.

[damo101]

they will fit your hub..i have ABS ae101 shafts in my ae82..

[L4AGZE]

Thanks for the advice. I have actually got a spare hub lying about so i will take that along with me just to double check.

[L4AGZE]

I'm curious now..... what would need to be done to transfer the ABS to a non ABS equipped car.....

[blacktop]

I'm no expert but i think you will need:
ABS control unit
Wheel speed sensors for each wheel
Hydraulic motor thingo
and I think there's a Valve or 2 that controls which wheel(s) will be receiving the action

I'm not sure if it will work with the stock brake lines, but most brake lines today are fairly sturdy.

I had an after market system on my old Landcruiser, it worked great when 4WDing but I broke it with my 35" tyres on the road

I didn't hook it up so I don't know whats involved but a couple of net searches should give you some answers, and maybe someone on here.

[The Witzl]

dont bother with retrofitting ABS to your AE92... you will fail in the explosion.

[L4AGZE]

dont bother with retrofitting ABS to your AE92... you will fail in the explosion.

Here ends the curiosity