Yes that is a leaking axle seal washing the grease out of your king pin/steering bearings.
Yes that is a leaking axle seal washing the grease out of your king pin/steering bearings.
1990 ST185 GT4 3SGTE
1991 ST184 SX 3SGTE
1991 SW20 GT 3SGTE
1998 ST215 GTT 3SGTE
2008 VDJ200 Sahara
Cheers.
I've ordered an axle seal kit.
Hopefully no damage has been caused.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
It wont cause any damage, its just a pain. When you pull it apart just check the swivel hub bearings are not worn. If they are they can put the axle out of centre and cause premature failure of the axle seal.
Cheers Dave
1977 RA28
1972 TA22
1984 Supra
Are you getting the full kit with new steering bearings and wiper seals etc?
Make sure you check your axle bushes for wear against your axles because these are what normal cause your axle seals to fail.
Check part no.90999-70067 in the link below if your not sure what I'm on about![]()
http://www.toyodiy.com/parts/p_G_198...MRPQ_4802.html
1990 ST185 GT4 3SGTE
1991 ST184 SX 3SGTE
1991 SW20 GT 3SGTE
1998 ST215 GTT 3SGTE
2008 VDJ200 Sahara
No idea.
The car is not for keeping, so spending large amounts of money on it are not going to happen.
I'll find out how much the kit is when they get back to me, and what it includes.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
1 Pressure wash entire car to look clean as when it left the factoryOriginally Posted by CrUZida
2 Sell car
3 ??????
4 Profit
My sig has been pruned as it was over 5 lines long.
Not for keeping, but a long away from selling.
Gotta fix it before I can go offroading.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
Bookmarks