cv joint boots which ones

**scrolla** · 13-03-2006, 09:42 PM

i was just changing my cv joint boots on my ae92 corolla seca fitted with 4agze and found out that none made by repco fit
which ones fit and were to get them, does any one know?

**Rolla Boy** · 13-03-2006, 10:39 PM

Try a CV Reco place or your local importer...

If not, go down to Toyota and order some new ones...

**Bahnugget** · 14-03-2006, 11:22 AM

i dunno if you were after inners or outers, but i saw this when browsing through the "how to remove 4agze driveshafts" thread.. hope it helps mate?

Originally Posted by feral4mr2

if anyone is looking for an inner CV boot, i found the Kelpro CIB-527 to be the closest match.

**scrolla** · 14-03-2006, 07:50 PM

thx for that i am looking for outter and found that brand new hilux ones match

from toyota they are $180 both the inner and outter from japan (3 weeks wait) one side only

**Bahnugget** · 14-03-2006, 07:52 PM

holy dooley that is NOT cheap!

**feral4mr2** · 14-03-2006, 08:44 PM

take your outter boot into any 'good' autoparts store, useing their Kelpro CV boot book they should be able to match you up a boot at a fraction of the cost of what you said above.