Nah sorry mate, don't have it.
hi strad
you wouldnt by any chance have a front type sump and pick up or a 1uz ?
ta
ian
Last edited by ian; 03-09-2008 at 09:24 PM.
nostalgia is not what it used to be:
hi strad
i was thinking [rare for me] could you put a spacer between the crossmember and the chassis rails that could give about another 10 mil without upsetting the geometry
ian
nostalgia is not what it used to be:
Originally Posted by ian
my 23 has a spacer between the crossmember and the bottom of the rail, 15mm if i remember rightly, add a couple of roll center correctors and all is gravy.
but i still cant see why your engine is sitting so high??
my 1uz is just sitting in the hole, no mounts or anything and its about 40-50mm to high (its sitting on the power steer rack) and i still have plenty of clerance under the hood.
how far away from the fire wall is your motor?
sheepers.
69 MS51 crown coupe. http://www.toymods.org.au/forums/sho...980#post835980
RA23 celica with 1JZ-GTE. http://www.toymods.org.au/forums/sho...sheepers+jza23
76 RA28 celica 1UZ, http://www.toymods.org.au/forums/showthread.php?t=12299
double post, sorry.
Last edited by sheepers; 05-09-2008 at 10:04 AM.
69 MS51 crown coupe. http://www.toymods.org.au/forums/sho...980#post835980
RA23 celica with 1JZ-GTE. http://www.toymods.org.au/forums/sho...sheepers+jza23
76 RA28 celica 1UZ, http://www.toymods.org.au/forums/showthread.php?t=12299
i think that the clearance issue is with the cross member
the celica ones dip down strads seem to go straight across
i may be wrong as a didnt have long to have a close look at it
ian
nostalgia is not what it used to be:
Bookmarks