W5x series gearbox ratio's

[Hurricane]

has any one got any info on the gear ratio's that W55,56,57,58's run? 5 ad 6 speeds.
and what gear boxs came in close ratios

cheers, dan

[CrUZida]

Search is your friend.

There must be at least eleventy billion pages on the world wide web containing this information.

(note: all were 5 speed)

[big_zop]

some people never learn...

Google brought these two up as its first hit:
here which links to here
here

What engine is this for as if you want a 6spd you can use a 1GFE IS200 gearbox (J160) which can be used for a 1GG(T)E.

[Hurricane]

i just bort a W58 close ratio 6 speed, are you saying they is not sutch a thing?

my pc is slow and searching can take days but if i must i must?

[RObErT_RaTh]

i just bort a W58 close ratio 6 speed, are you saying they is not sutch a thing?

my pc is slow and searching can take days but if i must i must?

It's got 6 speeds if you count reverse I guess

[Hurricane]

it might be a W59 as that is a 6 speed going off that chart, well soon i will find out if it is a 6 speed or not? it better be.

its for a 3TC also.

[RObErT_RaTh]

Where did you buy it from? If it was online do you have a link to the sale thread?

[CrUZida]

There is no factory W5x with 6 forward gears.
The W59 is like the W56, commercial style ratios.

Its possible there are aftermarket 6 speed gear sets for them, but a) highly unlikely and b) this would be the first I've heard of it.

[Norbie]

There are only two 6-speed boxes found in RWD Toyotas: V160 (JZA80 Supra) and J160 (IS200/Altezza). If you really do have a Toyota 6-speed it's probably the latter, since the V160 is worth approx $3k second-hand.

[Hurricane]

just asked him its a j160 close ratio 6 speed

does any one know if there any good?

would hold 300hp

ill try and dig up info but will have to use a mates pc i guess

cheers ,dan

[CrUZida]

Will be fine behind a mild power 3TGTE

[Hurricane]

what good, it will be running behind my turbo 3t for a bit, then i will put it behind my N/A 3t when its finished, i cant see it breaking behind that

[YelloRolla]

This will probably not be a good fit in your KE20 - the gear lever (at least on the ones that I have seen) are too far back and the shifter will be about 3/4 of the way along your hand brake lever.

It will also most likely necessitate the cutting of the subframe that runs across the front of the seat rails and will also place the shifter in a shitty location - but you can bend that a la AC Cobra.

The W58 that I run in my KE20 has the forward most shifter location.

[Hurricane]

well i bort it with a motor for a very good price so im not to fussed if it will not fit, but it was in a ke70 so if it can fit in one of them then i can make it fit the 20, i will soon see

[CrUZida]

Please dude, its bought, not bort.