Hi all, need some help with the autronic smc.

I've been stuffing around with changing the MSD to a bosch 008 ignition module.

In amoungst all this, i've really buggered something up.

Basically I cannot get the autronic to fire the msd or the bosch module.

If I earth the trigger wire on the bosch module i get a spark, so the module is ok. It seems to be the autronic not triggering it.

I don't have an oscilloscope. But I checked the ignition output wires from the autronic and am seeing 12v +ve on them. If I crank the engine this drops off. Is that normal behavour?

Any help would be much appricated.. Im not sure if somehow i've damaged the autronic ignition outputs?

Thanks
Joel