Results 1 to 7 of 7

Thread: MS123 A/C regulator

  1. #1
    Junior Member Grease Monkey johnny blade's Avatar
    Join Date
    Dec 2005
    Location
    Sweden
    Posts
    71

    Default MS123 A/C regulator

    I went to a "air condition dude" to fill up my AC,but we find a leak in this pressure regulator.
    http://www.polkatulk.se/Crown84/regulator.JPG
    Can i find this thing on any other vehicle or do i have to buy a new one from Toyota?
    What does it do?
    Do anyone know how much gas the system contains? It's a Super Saloon with dual AC (cool box in the back).
    1 MS55 - 3 TA47 - 1 MS123 - 1 YR21(SR21) - 1 RX80 - 1 ST165 - 1 JZS160

  2. #2
    Junior Member Grease Monkey johnny blade's Avatar
    Join Date
    Dec 2005
    Location
    Sweden
    Posts
    71

    Default Re: MS123 A/C regulator

    That thing cost 615au$(3500 swedish crowns) at Toyota in Sweden.
    Don't anyone know about the quantity?
    1 MS55 - 3 TA47 - 1 MS123 - 1 YR21(SR21) - 1 RX80 - 1 ST165 - 1 JZS160

  3. #3
    Junior Member Automotive Encyclopaedia
    Join Date
    Feb 2006
    Location
    vic
    Posts
    1,196

    Default Re: MS123 A/C regulator

    Many diff toyotas run that valve, Get a MX 83 one and swap the inside diaphram, I did this with my MS 137 crown.
    Dave

  4. #4
    Junior Member Grease Monkey johnny blade's Avatar
    Join Date
    Dec 2005
    Location
    Sweden
    Posts
    71

    Default Re: MS123 A/C regulator

    Ok, Thanks for the answer but there's only one MX83 in Sweden and i don't think that he will offer that thing to me.
    I can't find anything like that in my RX80 (just two of those in Sweden)..
    1 MS55 - 3 TA47 - 1 MS123 - 1 YR21(SR21) - 1 RX80 - 1 ST165 - 1 JZS160

  5. #5
    Junior Member Too Much Toyota
    Join Date
    Sep 2005
    Location
    Qld
    Posts
    5,590

    Default Re: MS123 A/C regulator

    if any help, similar (if not ientical) valve is also found in MZ1* Soarers and MA61 Supra - as well as MX73 Cressida. Also Crowns of that era probably have same valve.
    ------------------------------
    ST185 road barge / MZ11 forest barge / RA65 garage barge

  6. #6
    Junior Member Grease Monkey johnny blade's Avatar
    Join Date
    Dec 2005
    Location
    Sweden
    Posts
    71

    Default Re: MS123 A/C regulator

    There are no Soarer or Cressida (that new) here but there are a lot of MA61 (probably none with AC).
    I think i have fixed the leak now.I will pressure test it tomorrow.
    1 MS55 - 3 TA47 - 1 MS123 - 1 YR21(SR21) - 1 RX80 - 1 ST165 - 1 JZS160

  7. #7
    Junior Member Grease Monkey johnny blade's Avatar
    Join Date
    Dec 2005
    Location
    Sweden
    Posts
    71

    Default Re: MS123 A/C regulator

    It's blowing cold now.but the rear AC doesn't get cold.Any ideas?
    1 MS55 - 3 TA47 - 1 MS123 - 1 YR21(SR21) - 1 RX80 - 1 ST165 - 1 JZS160

Similar Threads

  1. 1JZ Fuel Pressure Regulator Limits
    By beasht in forum Tech and Conversions
    Replies: 14
    Last Post: 19-04-2008, 06:17 PM
  2. MS123 discs onto MA61?
    By Gibbon in forum Tech and Conversions
    Replies: 8
    Last Post: 20-10-2006, 11:51 AM
  3. Will Bosch Auxilary regulator handle boosted air?
    By CHB in forum Tech and Conversions
    Replies: 0
    Last Post: 24-07-2006, 07:24 PM
  4. MS123 5 stud conversion tips!
    By wilbo666 in forum Tech and Conversions
    Replies: 1
    Last Post: 23-04-2006, 10:14 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •