MA61 Replace window switch with auto one

[Gibbon]

This is how I replaced the standard MA61 drivers side power window switch with an auto up/down model.

This would not have been possible without the help of GA61XX who made up the modified wiring loom. Huge thanks to him.

Here's what I started with - the control box and the power switch.

Switch and box


This is a photo from GA61XX on starting the loom.

1) The plug for the window switch can be sourced from a RA60/5, MA61, hatch rear demister / wiper switch.

2) The plug for the control box is from a RA60/5, MA61, radio plug.

The Blue plug in the photo below is factory hatch rear demister / wiper plug from a MA61.

Note:- the wire's / pin's from the factory MA61 Blue plug, are plug & play in the hatch rear demister / wiper plug

New plug on MA61 loom


This is the final loom with the new plugs fitted:

Final modified loom


Here's what was in my car - busted up, half glued and screwed in power switch.

Broken switch


I made up some brackets to hold the new switch in. If it's screwed into the door then the plastic clip on cover doesn't fit.

Brackets



This is where I fitted the control box:

Box in door


And the final product.

Finished


For reference, here's the wiring loom from GA61XX - his loom worked like a charm.

Wiring diagram


Thanks

[JustCallMeOrlando]

And it's sooooo worth it. I love the one in mine.

[brett_celicacoupe]

the Z12 has one from factory

[cambelt]

Shit i must dig mine up to sell to the MA 61 guys , I bet there different tho.
Dave