I'm currently in the process of blue-printing a 2tgeu for turbo application.
No doubt its been done several times before, but looking for feedback from people who have done this....i.e. what compression/turbo model/boost levels were you running? If something has failed, what was it? Using standard or forged pistons/rods? etc.

I also have a 13T spare engine I can scavenge the crank etc. from for possible hybrid set-up.

The forums always have lots of info of what people intend to do, but not often how they perform longer term. My engine designed to be for mostly street use in a TA22, so gunna be running moderate boost (up to 10-12psi max) and keeping compression close to standard (9:1) for good off-boost response.

Any and all comments appreciated, cheers.