need help from jzx81/1jz owners

[eliterit]

im having trouble wiring up my igniter plugs from a soarer onto my jzx81 1jz motorset. my motorset came with the igniter plugs cut, so i sourced plugs from a soarer.

the reason im having trouble is because the plugs from the soarer has different wiring colors than the jzx81.

I have the jzx81 wiring diagram but it only shows the wire colors for igt1 through igt6 and then igf, but that's only 7 pins.

there are 2 plugs which plug directly into the igniter, one is a 12 pin, the other a 4 pin and one two pin plug for the noise filter.

if anyone has time would they be able to take a look at their jzx81 plugs and write down what colors go to each pin on each plug. this would be a huge help to me and is the last thing i am waiting on so i can fire up my x83.


thanks in advance

[JP]

here's the colours from my jzx81, looking at the back of the plug when it's plugged into the ignitor, starting at the top left pin...
BLK/BLU , BLK/ORG , BLK/RED , PNK/BLK , RED/GRN , BLK/WHT
YEL/BLK , YEL/BLU , YEL/RED , RED/BLK , PNK/BLU , RED/WHT

Then for the 4 pin plug looking from the same staring point as above...
BLK/YEL , BLK
WHT/BLK , YEL/GRN

and a fairly ordinary pic to try and illustrate my wiring sequence above:
http://users.tpg.com.au/adsl0uxv/1J_IGN.jpg

Jason

[eliterit]

thanks so much for taking the time to do this for me!


i checked my wire colors and it seems like this should work.


thanks again!