Moore front camber on RT142

[Braden]

I've heard the best way is to just install sigma lower control arms.
Is it just as simple as that?
And if i do this about how much camber will i have?
Cheers guys. =]

[Norbie]

I've seen it done on a TE71, the result was stupid amounts of camber (at least 4 degrees) and wheel clearance issues.

If it was me I'd install camber tops and if they don't offer enough adjustment get the struts bent.

[takai]

RT142 arm == 310mm
Sigma arm == 340mm


All the data is there, figure it out yourself.

[The Real Roadrunner]

sigma = roughly 3degrees more than you have now.

dont forget tie rods and rackends will probly need changing

[Pube]

If you are planning a brake upgrade, xt130 struts will give you roughly 3 deg neg camber as they have a different strut angle to rt142 struts. Thats even with using standard camber tops and lower control arms.