i've been told that its best to use OEM belts as they are the only one's that fit correctly
Hi all,
What have people done for buying replacement 1uz timing belts?
Are there different length timing belts for different engines?
Are they cheaper from the US?
As an example, I found this available with the idle tensioners too.
http://cgi.ebay.com/ebaymotors/90-94...spagenameZWD2V
i've been told that its best to use OEM belts as they are the only one's that fit correctly
Destroyer of 'Drop Forged' spanners
im using a gates 2uz one on my 1uz vvti
fits fine and looks well made etc etc, all the timing marks and centeelines are marked accurately, nil issues, turns fine
../delete/ban
tech moderator
E46 M3 Nürburgring Nordschleife - 8.38
really? hmm i WAS told that the aftermarket belts were a little long, they'd still fit but not as well as oem one's.........ahwell thats good to know for my 1uzOriginally Posted by ed_jza80
Destroyer of 'Drop Forged' spanners
i think gates may even make the OEM belts
nah my tensioners wre A1 condition - super low km engine
../delete/ban
tech moderator
E46 M3 Nürburgring Nordschleife - 8.38
I used a genuine toyota timing belt. costed $67.
The timing belt idler bearings cost alot as toyota only sell the whole assembly. (there are two idlers, one costs $244, the other costs $72)
But you can just press out the old bearings and get a bearing shop to match them up...
The timing belt tensioner itself was $102.
If you are changing the timing belt, i'd also recommend changing the water pump (dont forget to get the orings and toyota sealant). (Water pump - $159, orings <$10, sealant ~$30)
Note: These are the list prices of the parts, Give James Sloane at Castle Hill Toyota a ring, he will sort you out. (Toymod Members also get a discount.)
1977 RA35 Celica GT - I4 | 2007 GSV40R Aurion - V6
Don't live life being scared of death, live in the fear of not truly living. RP 2012
I think i have a Genuine 1UZ timing belt in the shed . All for you Strad
Dave
I used all Dayco stuff.
$200 for belt + cam/crank seals + both tensioner bearings.
$120 for tensioner itself.
Yes you can get it all off eBayUSA.
A friend paid about $160USD for all of the above and a waterpump.
I'm just not sure on the quality of the US stuff. But I am happy to trust the Dayco gear.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
Here is a link to a good post.
http://www.toymods.net/forums/showpo...02&postcount=3
There are 2 different belts.
Bookmarks